We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFP+ direct-attach cable with SFP+ connectors both ends, 6.56 ft

Cables To Go

Cables To Go 06124 SFP+ network ethernet cable 6.56 ft

SKU CH-PATJ-8ZV1T MPN 06124

SFP+ direct-attach cable connects active network equipment over 6.56 ft with 24AWG or 30AWG 100 Ohm construction and SFF-8431 connectors

  • CatSFP+
  • Connector A1 x SFF-8431 SFP+
  • Connector B1 x SFF-8431 SFP+
  • Length6.56 ft
  • ColorBlack
  • Cost-effective alternative to optical cables for short interconnects
  • Lower power consumption than optical assemblies in data centres
  • Premium 24AWG or 30AWG construction with 100 Ohm impedance
  • SFP+ SFF-8431 connectors with quick-release pull-latches
  • Supports 1x, 2x, 4x and 8x Fiber Channel data rates

SFP+ direct-attach copper cable

The Cables To Go 06124 is a passive SFP+ direct-attach copper cable built for short-reach links between switches, servers and storage arrays. It uses 24 AWG or 30 AWG, 100 Ohm twinax with SFF-8431 compliant connectors and quick-release pull-latches. The 6.56 ft black assembly arrives new and ready for rack deployment.

Data-centre and enterprise interconnects

Suits teams needing a low-power, cost-effective alternative to optical transceivers for 1x, 2x, 4x and 8x Fibre Channel rates inside a single rack or adjacent cabinets. Not for runs that exceed the cable length or for installations that require optical isolation or fibre media.

6.56 ft reach and supported rates

Comfortably handles 1x, 2x, 4x and 8x Fibre Channel traffic across the full 6.56 ft span with minimal latency and lower power draw than optics. Beyond that distance the copper medium reaches its practical limit and optical assemblies become necessary.

Highlights

  • Cost-effective alternative to optical cables for short interconnects
  • Lower power consumption than optical assemblies in data centres
  • Premium 24AWG or 30AWG construction with 100 Ohm impedance
  • SFP+ SFF-8431 connectors with quick-release pull-latches
  • Supports 1x, 2x, 4x and 8x Fiber Channel data rates

Specifications

BrandC2G
Model6124
CatSFP+
Connector A1 x SFF-8431 SFP+
Connector B1 x SFF-8431 SFP+
Length6.56 ft
ColorBlack
Shipping weight0.16 kg
Package size210 × 171 × 13 mm

Questions about this item

Do I need two SFP+ ports with SFF-8431 connectors to use the 6.56 ft cable?

Yes, each end terminates in an SFF-8431 SFP+ connector, so both devices must provide a matching SFP+ cage that accepts that interface.

Will the 24AWG or 30AWG, 100 Ohm construction work with legacy 1x and 2x Fibre Channel gear I keep in the rack?

The assembly supports 1x, 2x, 4x, and 8x Fibre Channel data rates, so older 1x and 2x equipment will interoperate without configuration changes.

How can I confirm the 6.56 ft link is running at the intended 8x Fibre Channel rate after installation?

Check the port statistics on each switch for the negotiated speed and error counters; a clean 8x rate with zero CRC errors indicates the cable is performing to spec.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.