Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.000851BTC
In stock
Cables To Go
Cables To Go 04125 Cat6 network ethernet cable 100 ft Black
A 100 ft Cat6 UTP patch cable with RJ45 connectors for voice, data and video distribution
- TypeConsumer Electronics
- Cat6
- Connector ARJ45 Male
- Connector BRJ45 Male
- Length100 ft.
- ColorBlack
- Cat6 rating supports bandwidth-intensive voice, data and video distribution
- 100 ft length provides extended reach for large-room or cross-building runs
- Non-booted RJ45 connectors allow easy insertion into dense patch panels
- Bonded twisted pairs maintain consistent spacing to minimise near-end crosstalk
- Meets Cat6 TIA/EIA standards for verified impedance and return-loss performance
Cat6 patch cable for long runs
This 100 ft unshielded twisted-pair cable uses RJ45 male connectors on both ends. It meets Cat6 TIA/EIA standards and is built for voice, data and video distribution. Bonded pair construction helps maintain twist spacing to the termination point. The design reduces impedance, structural return loss and near-end crosstalk.
Replaces shorter or lower-category links
Swapping a Cat5e or shorter Cat6 cable for this length removes the need for inline couplers or extra wall plates. The jump is worth it when a single 100 ft run reaches the target device without signal degradation. Each pair is bonded to preserve performance across the full distance.
Suits fixed indoor installations
Installers routing cable through walls, ceilings or conduit will appreciate the non-booted connectors and black jacket. Buyers who need shielded cable for noisy environments or outdoor-rated jacketing should look at something else. The 100 ft length also exceeds typical desktop patch needs.
Highlights
- Cat6 rating supports bandwidth-intensive voice, data and video distribution
- 100 ft length provides extended reach for large-room or cross-building runs
- Non-booted RJ45 connectors allow easy insertion into dense patch panels
- Bonded twisted pairs maintain consistent spacing to minimise near-end crosstalk
- Meets Cat6 TIA/EIA standards for verified impedance and return-loss performance
Specifications
| Brand | C2G |
|---|---|
| Model | 04125 |
| Type | Consumer Electronics |
| Cat | 6 |
| Connector A | RJ45 Male |
| Connector B | RJ45 Male |
| Length | 100 ft. |
| Color | Black |
| Features | For voice/data/video distribution, this cable will handle bandwidth-intensive applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable, this design minimizes Near-End Crosstalk (NEXT) levels |
| Shipping weight | 1.36 kg |
| Package size | 229 × 203 × 64 mm |
Questions about this item
What connectors does the 100 ft Cat6 cable use for wall jacks or patch panels?
Both ends are terminated with RJ45 male plugs that fit standard keystone jacks and patch-panel ports
How should the bonded pairs be handled when routing the cable through conduit?
Keep each pair twisted as close to the connector as possible and avoid sharp bends to preserve the twist spacing built into the cable
When would the cable typically need replacement in a permanent installation?
Replace it if the jacket is cut, kinked or crushed, or if certification testing shows excessive return loss or crosstalk beyond Cat6 limits
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00082768BTC
In stock
