Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
Cat6 UTP patch cable with snagless RJ-45 connectors, 8 ft length in orange
The Cables To Go 04019 is an eight-foot Cat6 UTP patch cable with RJ-45 male connectors on both ends. Its snagless boot protects the locking tab during repeated insertions into switches, routers, patch panels or modems. The orange jacket makes the run easy to identify in a crowded rack or wall plate. It supports voice, data and video distribution in standard Gigabit Ethernet installations.
As a passive copper assembly the cable draws no power and produces no noise or heat of its own. The unshielded twisted-pair construction relies on the connected equipment for any signal conditioning. Normal operation adds no thermal load to a rack or cabinet and requires no airflow provision beyond what the active gear already needs.
Each end plugs directly into any 8P8C jack without adapters, so the cable works with existing patch panels, wall outlets and network interfaces. The snagless design prevents the tab from catching on neighbouring cables, reducing the chance of accidental disconnects during moves. The eight-foot length reaches between adjacent rack units or from a wall plate to a desktop device without excess slack. Buyers needing longer runs, shielded construction or pre-terminated fibre will need a different cable type.
| Brand | C2G |
|---|---|
| Model | 04019 |
| Type | Consumer Electronics |
| Cat | 6 |
| Connector A | RJ-45 Male |
| Connector B | RJ-45 Male |
| Length | 8 ft. |
| Color | Orange |
| Features | Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. For voice/data/video distribution, this cable will handle bandwidth-intensive applications. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable, this design minimize |
| Shipping weight | 0.11 kg |
| Package size | 171 × 140 × 13 mm |
The snagless boot covers the locking tab so it slides past adjacent ports; press the tab down fully until you hear the click, then route the 2.43 m length with gentle bends to avoid kinking the unshielded pairs.
Replace it if the orange jacket shows cuts, the snagless boots tear off, or the RJ-45 contacts corrode — any of those will drop link speed on the 45 metre channel budget this cable is part of.
The total channel must stay under 45 metres; this 2.43 m patch cord consumes a small slice, so the permanent link and the far-end patch cord together must not exceed the remaining allowance.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?