We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RG58 coaxial cable with BNC male connectors at both ends, 15 ft long

Cables To Go

Cables To Go 03186 RG58 BNC Cable 15 ft 50 Ohm

SKU CH-SNQM-0RWZ8 MPN 03186

RG58 coaxial cable with BNC male connectors for 50-ohm ThinNet 802.3 networks, 15 ft length

  • TypeStereo Cables
  • ColorBlack
  • Length15 ft.
  • Connector Number2
  • FeaturesConnector 1: BNC Male Connector 2: BNC Male Impedance: 50 Oh
  • Ideal for ThinNet Ethernet 802.3 networks
  • 50 Ohm impedance matches RG58 coaxial requirements
  • 15 ft (4.57 m) length suits typical segment runs
  • Dual BNC male connectors ensure secure termination
  • Rugged heavy-duty construction withstands tough environments

RG58 BNC Thinnet Cable 15 ft

The C2G 03186 is a coaxial cable built for ThinNet Ethernet 802.3 networks. It uses RG58 construction with a 50 Ohm impedance and BNC male connectors on both ends. The 15 ft black cable weighs 0.440 lbs and provides shielding suited to interference-heavy environments.

Fits legacy coax networks.

This cable suits maintainers of 10Base-2 segments who need a reliable BNC-to-BNC link. It will not serve installers deploying Category 5e or newer twisted-pair infrastructure, nor anyone requiring a different impedance or connector type.

Simple push-on BNC connection, watch for pin damage

Each end pushes onto a BNC female port and locks with a quarter turn; no tools are required. The most common issue is a bent centre pin on the male connector, which prevents a solid mate and causes intermittent signal loss.

Highlights

  • Ideal for ThinNet Ethernet 802.3 networks
  • 50 Ohm impedance matches RG58 coaxial requirements
  • 15 ft (4.57 m) length suits typical segment runs
  • Dual BNC male connectors ensure secure termination
  • Rugged heavy-duty construction withstands tough environments

Specifications

BrandC2G
Model03186
TypeStereo Cables
ColorBlack
Length15 ft.
Connector Number2
FeaturesConnector 1: BNC Male
Connector 2: BNC Male
Impedance: 50 Ohm
Weight: 0.440 lbs.
The ideal cable for ThinNet Ethernet 802.3 network applications!
This heavy-duty cable will stand the test of time in the toughest environments.
It meets or exceeds standards for shielding and features a rugged design.
BNC cables are the solution in environments where there is considerable interference, or where running new twisted pair wire is not feasible.
*Requires BNC t-connector for proper connection at nic or hub.
Shipping weight0.20 kg
Package size191 × 140 × 19 mm

Questions about this item

What network standard does this 50 Ohm RG58 cable support?

It is designed for ThinNet Ethernet 802.3 10Base-2 networks using BNC male connectors on both ends.

Can I connect this 15 ft BNC cable to older RG58 equipment?

Yes, the 50 Ohm impedance and BNC male connectors match legacy ThinNet RG58 gear, so it will interoperate with existing segments.

How can I verify the link is working after I install the cable?

Check that both BNC male connectors are fully seated and the network interface shows a valid 10Base-2 link with no collisions or errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.