Cables To Go
Cables To Go 02656 DB25 Male-Female Serial Extension Cable 10 ft Beige
Extends a DB25 serial or parallel link by 10 ft with all 25 lines wired straight through and molded connectors for EMI/RFI protection
- TypeExtension Cable
- ColorBeige
- Length10 ft.
- Connector Number2
- Connector DetailConnector 1: DB25 Male Connector 2: DB25 Female
- Terminal GenderMale to Female
- Extends serial or parallel links by 10 ft with pin-to-pin wiring
- DB25 male-to-female connectors keep all 25 lines active
- Molded ends and foil shield block EMI/RFI interference
- Thumbscrews on both ends secure a firm connection
- Copper conductors ensure reliable signal transmission
Cable purpose and fit
This 10 ft DB25 male-to-female extension cable is built for RS-232 serial or parallel links. It serves technicians and hobbyists who need to bridge a gap between legacy ports without replacing the original cable. The moulded beige jacket and thumbscrew connectors suit office, industrial or bench environments. All 25 conductors run straight through for direct pin-to-pin compatibility.
Build integration
The cable adds 3.04 metres of reach using a DB25 male plug on one end and a DB25 female socket on the other. Copper conductors and foil shielding protect the signal from EMI and RFI interference. No extra adapters, power supplies or software drivers are required; the extension simply inserts into the existing link. Its lightweight .720 lbs construction keeps strain on panel-mounted ports to a minimum.
Sustained operation
Foil shielding maintains signal integrity over the full length during continuous data sessions. Moulded strain relief and thumbscrew locking prevent accidental disconnection when equipment vibrates or cables are routed through trays. The straight-through wiring ensures every one of the 25 lines behaves identically to a shorter factory cable. Users who need longer runs, different connector genders or non-standard pinouts will need a different solution.
Highlights
- Extends serial or parallel links by 10 ft with pin-to-pin wiring
- DB25 male-to-female connectors keep all 25 lines active
- Molded ends and foil shield block EMI/RFI interference
- Thumbscrews on both ends secure a firm connection
- Copper conductors ensure reliable signal transmission
Specifications
| Brand | C2G |
|---|---|
| Model | 02656 |
| Type | Extension Cable |
| Color | Beige |
| Length | 10 ft. |
| Connector Number | 2 |
| Connector Detail | Connector 1: DB25 Male Connector 2: DB25 Female |
| Terminal Gender | Male to Female |
| Features | Features: Molded Conductor: Copper Weight: 0.720 lbs. Additional Information: Thumbscrew |
| Shipping weight | 0.01 kg |
| Package size | 25 × 19 × 13 mm |
Questions about this item
How far can I reliably extend my RS-232 link with this 10 ft DB25 cable?
The cable is 10 ft (3.04 m) long and wires all 25 pins straight through, so it adds exactly that length to your existing run.
Does the foil-shielded, molded DB25 cable run hot or make noise during all-day use?
It is a passive copper cable with no active electronics, so it generates no heat and produces no audible noise.
What connectors must my current equipment already have for this 02656 extension to plug in?
Your existing cable or device needs a DB25 female port to accept the male end, and the peripheral needs a DB25 male port for the female end.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
