Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
A slim Cat6 patch cable with snagless RJ-45 connectors, 36% thinner than standard Cat5e and built to ANSI/TIA-568-C.2
This 3 ft yellow Cat6 patch cable uses a 28AWG construction that reduces the overall diameter by 36 percent compared to standard Cat5e cables. The slimmer profile makes routing through crowded cable trays, patch panels and small desktop grommets noticeably easier. Both ends carry RJ-45 male connectors. The cable meets the ANSI/TIA-568-C.2 standard for patch cord performance.
Moulded snagless boots cover the connector release tabs so they do not catch on neighbouring cables during installation or removal. This reduces the chance of a broken latch that would leave the plug loose in the port. The unshielded twisted-pair design keeps the cable light and flexible for short patch runs. No additional software or drivers are involved.
The 0.91 m length works well for switch-to-panel or device-to-wall connections inside a single rack or desk cluster. Builders who need longer runs, shielded cable for noisy environments or bulk spools for custom termination should look elsewhere. The fixed 3 ft length also limits reuse in larger cabinet layouts.
| Brand | C2G |
|---|---|
| Model | 01171 |
| Type | Network Ethernet Cable |
| Cat | 6 |
| Connector A | 1 x RJ-45 Male |
| Connector B | 1 x RJ-45 Male |
| Length | 3 ft. |
| Color | Yellow |
| Features | 36% reduction in diameter compared to standard Cat5e cables Snagless connector design Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance 28AWG construction |
| Shipping weight | 0.04 kg |
| Package size | 114 × 102 × 13 mm |
The 28AWG wires and snagless boots are fixed parts of the cable; they do not require scheduled maintenance and are only replaced if physical damage occurs.
The cable meets the ANSI/TIA-568-C.2 patch-cord standard, so its rated Cat6 bandwidth and 1 Gbps Ethernet throughput are sustained without a lower internal bottleneck.
Passive copper cables add negligible resistance; the 36 % thinner 28AWG build does not increase heat or power draw compared with thicker Cat5e or Cat6 cords.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?