Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
A 10 ft Cat6 patch cable with 28 AWG slim construction that is 36% thinner than standard Cat5e, snagless RJ-45 connectors, and ANSI/TIA-568-C.2 compliance
This ten-foot Cat6 patch cable uses 28AWG conductors that reduce its diameter by 36 percent compared with standard Cat5e cables. The slimmer profile makes routing through tight ducts and crowded racks easier. Both ends carry snagless RJ-45 male connectors protected by moulded boots. The cable meets the ANSI/TIA-568-C.2 patch-cord performance standard.
Installers who need a thin, flexible patch lead for home offices, small-business switches or patch panels will appreciate the reduced bulk. The unshielded construction means it is not suited to environments that demand foil or braid shielding against strong electromagnetic interference. Buyers who require a crossover pin-out or a different length should select another cable.
The defining specification is the 28AWG unshielded Cat6 construction at a ten-foot length. This combination decides whether the cable fits the physical space and performance class required. Confirm the run length and shielding requirement before ordering.
| Brand | C2G |
|---|---|
| Model | 01109 |
| Type | Consumer Electronics |
| Cat | 6 |
| Connector A | RJ-45 Male |
| Connector B | RJ-45 Male |
| Length | 10 ft. |
| Color | Black |
| Shielded | No |
| Features | 36% reduction in diameter compared to standard Cat5e cables Snagless connector design Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance 28AWG construction |
| Shipping weight | 0.23 kg |
| Package size | 152 × 102 × 51 mm |
Push each RJ-45 plug straight into the port until the moulded boot clicks; the snagless design protects the latch during insertion and removal.
No scheduled maintenance is needed; inspect the boots and connectors periodically and replace the cable if the latch tabs snap or the jacket shows kinks.
The 28AWG conductors meet ANSI/TIA-568-C.2 patch-cord limits, so the first constraint under continuous load is the 10 ft length budget, not the reduced diameter.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?