We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cables To Go

Cables To Go 01106 Cat6 network ethernet cable 7 ft black 28AWG 36% slimmer

SKU CH-RP4H-VQ75R MPN 01106

Slim Cat6 patch cable with 28AWG conductors, 36% thinner than standard, snagless RJ45 connectors, 7 ft black

  • TypeBanker Box
  • Cat6
  • Connector ARJ-45 Male
  • Connector BRJ-45 Male
  • Length7 ft.
  • ColorBlack
  • 36% slimmer profile improves airflow in dense racks
  • 28 AWG conductors enable tighter bend radius for easier routing
  • Snagless boot prevents latch damage during installation
  • Cat6 performance meets ANSI/TIA-568-C.2 patch-cord standard
  • 7 ft length suits short rack-to-rack connections

Cat6 Slim Patch Cable for High-Density Racks

This 7 ft Cat6 patch cable uses 28AWG conductors to achieve a 36% diameter reduction versus standard Cat6 cables. The slimmer profile improves airflow and eases routing through crowded cable management panels in datacentres and network closets. Snagless moulded boots protect the RJ-45 connectors during installation and removal. It meets the ANSI/TIA-568-C.2 standard for patch cord performance.

Sustained Signal Quality in Tight Bundles

Reduced conductor size maintains Cat6 performance while the smaller bend radius allows tighter turns without degrading signal integrity over the full 7 ft length. Unshielded twisted-pair construction minimises Near-End Crosstalk even when many cables run side-by-side for extended periods. The copper conductors and snagless boots preserve reliable connectivity under continuous bandwidth-intensive voice, data or video loads.

Verify Port Clearance and Colour Coding Needs

Confirm that the 28AWG slim connectors fit the port density of your switches, patch panels or wall plates before ordering. The black jacket is one of several colour options; choose a different hue if your installation relies on colour-coded cable management. No shielding is present, so avoid routing alongside strong EMI sources such as power distribution units.

Highlights

  • 36% slimmer profile improves airflow in dense racks
  • 28 AWG conductors enable tighter bend radius for easier routing
  • Snagless boot prevents latch damage during installation
  • Cat6 performance meets ANSI/TIA-568-C.2 patch-cord standard
  • 7 ft length suits short rack-to-rack connections

Specifications

BrandC2G
Model01106
TypeBanker Box
Cat6
Connector ARJ-45 Male
Connector BRJ-45 Male
Length7 ft.
ColorBlack
ShieldedNo
Features36% reduction in diameter compared to standard Cat5e cables
Snagless connector design
Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance
28AWG construction
Shipping weight0.06 kg
Package size203 × 140 × 13 mm

Questions about this item

Does the 28AWG construction make this 7 ft Cat6 cable run cooler than standard patch cords in a packed rack?

The 36% slimmer diameter increases airflow around each cable, which helps heat dissipate in dense installations.

What connectors must my existing gear have for this RJ-45 male to RJ-45 male patch cord to plug straight in?

Any device or panel with standard RJ-45 female ports — switches, routers, patch panels, wall plates — will accept both ends.

Will the slimmer 28AWG jacket and snagless boots fit cleanly alongside thicker Cat5e cables in my current cable management?

Yes, the reduced diameter and smaller bend radius allow it to route through the same panels and trays without crowding.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.