We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black Cat6 patch cable with snagless RJ45 connectors, slim 28AWG unshielded design

Cables To Go

Cables To Go 01097 Cat6 network ethernet cable 6 in black 28AWG snagless unshielded

SKU CH-NDJ6-72071 MPN 01097

A 6-inch Cat6 patch cable with 28 AWG conductors that are 36% thinner than standard, snagless boots, and RJ-45 connectors for high-density network installs

  • TypeBanker Box
  • Cat6
  • Connector ARJ-45 Male
  • Connector BRJ-45 Male
  • Length6 in.
  • ColorBlack
  • 36% slimmer diameter enables tighter routing in dense racks
  • Snagless boot prevents latch damage during frequent patch changes
  • 28 AWG conductors reduce bend radius for easier cable management
  • Cat6 performance meets ANSI/TIA-568-C.2 patch cord standard
  • 6-inch length keeps short links tidy in patch panels

Slim Cat6 patch cord for dense racks

The 01097 is a six-inch Cat6 UTP patch cable built with 28 AWG conductors. Its 36% slimmer diameter suits high-density datacentre racks and tight patch-panel runs. Snagless boots protect the RJ-45 plugs during frequent moves. Meets ANSI/TIA-568-C.2 patch-cord performance requirements.

Thermals noise and power

The unshielded slim design increases airflow around adjacent cables compared with standard Cat6, helping equipment fans move air more efficiently. Passive copper construction draws no power and adds no audible noise. Reduced bend radius eases routing without kinking, preserving signal integrity in crowded pathways.

Build integration

RJ-45 male connectors on both ends plug directly into switches, servers or patch panels without adapters. The compact profile frees space in cable-management trays and leaves room for additional cords in the same channel. Black jacket supports colour-coded installations. No external grounding or shielding termination is required.

Highlights

  • 36% slimmer diameter enables tighter routing in dense racks
  • Snagless boot prevents latch damage during frequent patch changes
  • 28 AWG conductors reduce bend radius for easier cable management
  • Cat6 performance meets ANSI/TIA-568-C.2 patch cord standard
  • 6-inch length keeps short links tidy in patch panels

Specifications

BrandC2G
Model01097
TypeBanker Box
Cat6
Connector ARJ-45 Male
Connector BRJ-45 Male
Length6 in.
ColorBlack
ShieldedNo
Features36% reduction in diameter compared to standard Cat5e cables
Snagless connector design
Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance
28AWG construction
Shipping weight0.23 kg
Package size152 × 102 × 51 mm

Questions about this item

How do I install the RJ-45 connectors without damaging the snagless boots?

Push each RJ-45 male connector straight into the port until it clicks; the molded snagless boot slides over the latch so it cannot catch on adjacent cables during insertion or removal.

What maintenance or replacement will this Cat6 patch cord need over time?

Inspect the 28 AWG conductors and snagless boots periodically; replace the cable if the boot cracks, the latch breaks, or continuity tests show excessive Near-End Crosstalk.

What physical limit appears first when this slim cable runs at full bandwidth in a dense rack?

The 36 % smaller diameter reduces airflow blockage but also lowers the maximum pull tension; sustained tension or tight bends beyond the reduced bend radius will degrade performance before the Cat 6 rating is reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.