Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
Slim Cat6 patch cable with snagless RJ-45 connectors, 28AWG build and 36% smaller diameter than standard Cat5e
This 5 ft Cat6 unshielded twisted-pair cable uses 28 AWG conductors and a snagless RJ-45 design. Its slim diameter is 36 % smaller than standard Cat5e patch cords, making it easier to route through tight cable-management channels. The gray jacket meets the ANSI/TIA-568-C.2 standard for patch-cord performance. Ideal for connecting a desktop, laptop or console to a nearby switch or wall jack.
Suits users who need a short, flexible link between a device and a network port in the same room or rack. The reduced bulk helps when multiple cables share a single pathway or patch panel. Not suited for installers who require shielded cable for high-EMI environments, runs longer than the supplied length, or plenum-rated jackets for in-wall installations.
The 28 AWG construction is the key specification that determines bend radius, insertion force and maximum recommended run length. It enables the slim profile and snagless boot but limits the cable to patch-cord distances rather than full horizontal cabling. Verify that your project allows 28 AWG patch cords before purchasing.
| Brand | C2G |
|---|---|
| Model | 01091 |
| Type | Consumer Electronics |
| Cat | 6 |
| Connector A | RJ-45 Male |
| Connector B | RJ-45 Male |
| Length | 5 ft. |
| Color | Gray |
| Shielded | No |
| Features | 36% reduction in diameter compared to standard Cat5e cables Snagless connector design Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance 28AWG construction |
| Shipping weight | 0.23 kg |
| Package size | 152 × 102 × 51 mm |
The 28 AWG construction is built to the ANSI/TIA-568-C.2 patch-cord standard, so it meets the same performance requirements as standard cables.
The cable is rated to the Cat 6 ANSI/TIA-568-C.2 specification, so the link budget and connector return loss set the ceiling, not the 1.52 m length.
Ethernet patch cords carry only signal current, so they generate no measurable heat and consume no power regardless of shielding or gauge.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?