We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin grey Cat6 patch cable with snagless RJ45 plugs, 3 ft long

Cables To Go

Cables To Go 01089 Cat6 Slim Network Ethernet Cable 3 ft Gray 28AWG

SKU CH-5SK7-HARSA MPN 01089

A 3 ft gray Cat6 patch cable with 28 AWG conductors that are 36 % thinner than standard, snagless RJ‑45 plugs and ANSI/TIA‑568‑C.2 compliance

  • TypeConsumer Electronics
  • Cat6
  • Connector ARJ-45 Male
  • Connector BRJ-45 Male
  • Length3 ft.
  • ColorGray
  • 36% slimmer profile fits tight racks and improves airflow
  • Snagless boot prevents connector damage during installation
  • Cat 6 performance meets ANSI/TIA-568-C.2 patch-cord standard
  • 28 AWG conductors enable tighter bend radius for easy routing
  • 3 ft (0.91 m) length suited for short patch connections

Slim Cat6 cable for dense patching

The C2G 01089 is a Category 6 unshielded patch cord built with 28AWG conductors that reduce its diameter by 36% compared to standard Cat5e cables. This slim profile suits high-density datacentre racks and tight cable-management panels where airflow and routing space are limited. Both ends carry RJ-45 male connectors with moulded snagless boots to prevent latch damage during installation.

Sustained signal quality in tight bundles

The reduced conductor gauge maintains the ANSI/TIA-568-C.2 patch-cord performance standard while the smaller bend radius lets the cable follow tighter routes without kinking. In congested pathways the narrower jacket improves airflow around adjacent cables, helping to keep operating temperatures stable during continuous bandwidth-intensive voice, data or video distribution.

3 ft length fixes the reach

At three feet (0.91 metres) this grey patch cord is intended for short rack-to-rack or panel-to-device links; longer runs will need a different length. Buyers who need shielded construction, outdoor rating or a different colour should select another cable.

Highlights

  • 36% slimmer profile fits tight racks and improves airflow
  • Snagless boot prevents connector damage during installation
  • Cat 6 performance meets ANSI/TIA-568-C.2 patch-cord standard
  • 28 AWG conductors enable tighter bend radius for easy routing
  • 3 ft (0.91 m) length suited for short patch connections

Specifications

BrandC2G
Model01089
TypeConsumer Electronics
Cat6
Connector ARJ-45 Male
Connector BRJ-45 Male
Length3 ft.
ColorGray
ShieldedNo
Features36% reduction in diameter compared to standard Cat5e cables
Snagless connector design
Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance
28AWG construction
Shipping weight0.23 kg
Package size152 × 102 × 51 mm

Questions about this item

Does the 28 AWG slim design run cooler in a crowded patch panel?

The 28 AWG conductors reduce the cable diameter by 36 percent compared to standard Cat6, giving a smaller surface area that improves airflow in high-density installations.

What devices do I need to plug this cable into?

Each end has an RJ-45 male connector, so you need two devices with standard RJ-45 network ports such as a router, switch, PC or network-attached storage.

Will this Cat6 patch cable work with my older Cat5e wall jacks?

Yes, the cable meets the ANSI/TIA-568-C.2 patch-cord standard and uses RJ-45 connectors, making it fully backward-compatible with Cat5e and Cat5 infrastructure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.