Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cables To Go
Slim 28 AWG Cat6 patch cord with snagless RJ-45 plugs, 36 % thinner than standard Cat5e and compliant with ANSI/TIA-568-C.2
The Cables To Go 01077 is a 4 ft Cat6 UTP patch cable with RJ-45 male connectors on both ends. Its 28AWG construction gives a 36% reduction in diameter compared to standard Cat5e cables, making it easier to route through crowded panels or narrow trunking. The snagless connector design protects the locking tab during repeated insertion and removal. It meets the ANSI/TIA-568-C.2 standard for patch cord performance.
Thinner conductors have higher resistance per metre, so voltage drop and insertion loss increase with length. At 4 ft the cable stays well within the Cat6 channel limits defined by the ANSI/TIA-568-C.2 standard, maintaining reliable throughput for Gigabit Ethernet under continuous load. The unshielded twisted-pair geometry relies on pair balance rather than a foil screen, which is adequate for typical office or home environments with moderate electromagnetic interference.
The 36% slimmer profile is the single specification that determines whether this cable suits your installation. If you need to pack multiple patch cords into a high-density switch, a shallow cable manager or a narrow conduit, the reduced diameter is the enabling factor. Builders who need shielded cabling for noisy industrial sites or longer runs that exceed the 4 ft reach should select a different construction.
| Brand | C2G |
|---|---|
| Model | 01077 |
| Type | Others |
| Cat | 6 |
| Connector A | RJ-45 Male |
| Connector B | RJ-45 Male |
| Length | 4 ft. |
| Color | Blue |
| Shielded | No |
| Features | 36% reduction in diameter compared to standard Cat5e cables Snagless connector design Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance 28AWG construction |
| Shipping weight | 0.04 kg |
| Package size | 191 × 121 × 13 mm |
The 28AWG construction carries standard Cat6 current with no extra heat or power draw during continuous use.
Any equipment with a standard RJ-45 port — routers, switches, PCs or patch panels — will accept both ends.
Yes, it meets ANSI/TIA-568-C.2 and interoperates with Cat5e links at the lower category's speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?