We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue slim Cat6 patch cable with snagless RJ45 connectors, two feet long

Cables To Go

Cables To Go 01074 Cat6 network ethernet cable 2 ft Blue

SKU CH-A0YX-V8J81 MPN 01074

A 2 ft Cat6 patch cable with a 36 % slimmer 28AWG design and snagless RJ-45 connectors for tight spaces

  • TypeConsumer Electronics
  • Cat6
  • Connector ARJ-45 Male
  • Connector BRJ-45 Male
  • Length2 ft.
  • ColorBlue
  • Easier routing in tight spaces thanks to 36% slimmer profile than standard Cat5e
  • Snagless boots protect the latch from catching during pulls
  • Meets ANSI/TIA-568-C.2 patch-cord performance requirements
  • 28AWG conductors keep the cable light and flexible
  • 2 ft length suits short rack or desk connections

C2G Cat6 Slim Patch Cable 2 ft

The Cables To Go 01074 is a 2-foot Cat6 unshielded twisted-pair patch cable with RJ-45 male connectors on both ends. Its 28AWG construction reduces the diameter by 36 percent compared with standard Cat5e cables, making it easier to route in tight spaces. The snagless boot protects the latch during repeated insertions.

Installers needing a short, flexible link

The slim profile suits dense patch panels, wall plates and crowded rack cabinets where standard cables would block adjacent ports. Home users running a single connection behind furniture will also appreciate the reduced bulk. Builders who require shielded cable for noisy environments or runs longer than the supplied length should choose a different product.

Meets ANSI/TIA-568-C.2 patch-cord standard

Compliance with the ANSI/TIA-568-C.2 specification confirms the cable passes the required performance tests for Cat6 patch cords. The 28AWG conductors and unshielded design are the defining physical attributes that determine whether this cable fits the installation.

Highlights

  • Easier routing in tight spaces thanks to 36% slimmer profile than standard Cat5e
  • Snagless boots protect the latch from catching during pulls
  • Meets ANSI/TIA-568-C.2 patch-cord performance requirements
  • 28AWG conductors keep the cable light and flexible
  • 2 ft length suits short rack or desk connections

Specifications

BrandC2G
Model01074
TypeConsumer Electronics
Cat6
Connector ARJ-45 Male
Connector BRJ-45 Male
Length2 ft.
ColorBlue
ShieldedNo
Features36% reduction in diameter compared to standard Cat5e cables
Snagless connector design
Meets the ANSI/TIA-568-C.2 standard for Patch Cord Performance
28AWG construction
Shipping weight0.23 kg
Package size152 × 102 × 51 mm

Questions about this item

How do I insert the snagless RJ-45 connectors without damaging the latch?

Press the connector straight into the port until the latch clicks; the snagless boot protects the tab during insertion and removal, so avoid rocking the plug side to side.

What upkeep does the 28AWG Cat6 patch cord require over time?

Inspect the boot and cable jacket periodically for kinks or abrasion; the slim 28AWG construction is more flexible, so replace the cable if the jacket splits or the latch no longer holds securely.

At what point does the 2-foot length limit performance in a sustained 1 Gbps link?

The 2 ft length is well within the ANSI/TIA-568-C.2 channel allowance, so the first limit you hit will be the port speed of the connected devices, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.