We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre cable with two LC connectors on each end, 9 metres long

Cables To Go

Cables To Go 01005 OM4 fibre optic cable LC-LC 50/125 duplex 9 m aqua

SKU CH-8X3R-NW0CM MPN 01005

Duplex multimode OM4 cable with LC connectors supports 40 and 100 Gigabit Ethernet over 9 metres

  • TypeFiber Optic Cable
  • ColorAqua
  • Length29.53 ft.
  • Connector DetailConnector 1: (2) LC Male Connector 2: (2) LC Male
  • Terminal GenderMale to Male
  • SpecificationsFiber Count - 2 Nominal Weight kg/km (lb/1000ft) - 3.4 (2.3)
  • OM4 standard enables 40 and 100 Gigabit Ethernet speeds
  • 50/125 multimode core optimises bandwidth over 9 metre runs
  • LC duplex connectors plug straight into 40GBase-SR4 and 100GBase-SR10 ports
  • 2 mm jacket with 1 cm installed bend radius simplifies dense rack routing
  • Aqua colour coding identifies OM4 links instantly in mixed cable trays

9 m OM4 duplex cable

This 9 metre OM4 multimode cable uses 50/125 micron fibre with LC male connectors on both ends. It is built to OM4 transmission standards and carries an aqua jacket for easy identification in dense patch panels. The duplex construction provides two fibres for bi-directional links in data-centre and enterprise networks. Installers can route it through tight pathways thanks to a 2.0 mm outside diameter.

40 GbE and 100 GbE headroom

The cable supports 40 Gigabit and 100 Gigabit Ethernet over 40GBase-SR4 and 100GBase-SR10 interfaces. At 850 nm wavelength it delivers the bandwidth needed for short-reach server-to-switch and switch-to-switch runs. Performance drops beyond the OM4 distance limits for those speeds, so longer campus links will require single-mode fibre instead.

LC male duplex fit

Male LC connectors on both ends plug directly into SFP+ and QSFP+ transceiver ports without adapters. The 1.0 cm installed bend radius allows tight bends inside cabinets while the 3.0 cm loaded radius protects the fibre during pulling. OFNP and CSA FT-6 ratings mean it can be installed in plenum spaces without additional conduit.

Highlights

  • OM4 standard enables 40 and 100 Gigabit Ethernet speeds
  • 50/125 multimode core optimises bandwidth over 9 metre runs
  • LC duplex connectors plug straight into 40GBase-SR4 and 100GBase-SR10 ports
  • 2 mm jacket with 1 cm installed bend radius simplifies dense rack routing
  • Aqua colour coding identifies OM4 links instantly in mixed cable trays

Specifications

BrandC2G
Model01005
TypeFiber Optic Cable
ColorAqua
Length29.53 ft.
Connector DetailConnector 1: (2) LC Male
Connector 2: (2) LC Male
Terminal GenderMale to Male
SpecificationsFiber Count - 2
Nominal Weight kg/km (lb/1000ft) - 3.4 (2.3)
Nominal Outside Diameter mm (in) - 2.0 (0.08)
Minimum Bend Radius Loaded cm (in) - 3.0 (1.2)
Minimum Bend Radius Installed cm (in) - 1.0 (0.4)
Maximum Tensile Loads Short-Term N (lbf) - 220 (48)
Maximum Tensile Loads Long-Term N (lbf) - 66 (15)
Storage Temperature - -40°C to 70°C
Installation Temperature - 0°C to 60°C
Oper[ation Temperature - 0°C to 70°C
Approvals - NEC, OFNP, CSA FT-6, ICEA S-83-596
FeaturesConstructed to support OM4 transmission standards
Multimode fiber construction - 50/125 diameter core and cladding
Support for 40 Gigabit and 100 Gigabit Ethernet communication
Fiber optic cable designed for 40GBase-SR4 and 100GBase-SR10 ports and 40/100Gb equipment
Shipping weight0.09 kg
Package size51 × 51 × 51 mm

Questions about this item

Will the 50/125 micron OM4 duplex cable work with my existing OM3 patch panels and LC transceivers?

Yes, the 50/125 micron multimode construction follows OM4 standards which are fully backwards compatible with OM3 infrastructure and standard LC interfaces.

How can I verify the 9 metre aqua cable is performing at 40 Gigabit or 100 Gigabit Ethernet speeds after installation?

Check link lights on connected 40GBase-SR4 or 100GBase-SR10 ports and run a fibre certification tester at 850 nm wavelength to confirm insertion loss meets OM4 limits.

Does the box contain only the 9 metre LC-LC duplex cable or are dust caps and pulling eyes included?

The package supplies the 9 metre aqua PVC cable with two LC male connectors on each end; dust caps, pulling eyes or other accessories are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.