We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 shielded Ethernet cable, 8 ft, snagless RJ45 connectors

Cables To Go

Cables To Go 00921 Cat6 network ethernet cable 8 ft

SKU CH-Y4XX-A01EM MPN 00921

Shielded Cat6 patch cable with snagless RJ-45 connectors, 8 ft length, tested to ANSI/TIA 568 C.2 component requirements

  • TypeBanker Box
  • CatCategory 6
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length8 ft.
  • ColorWhite
  • Shielded design blocks noise and electromagnetic interference
  • Cat6 rated for bandwidth-intensive voice, data and video distribution
  • Snagless boots protect connector tabs during installation
  • Individually tested to meet ANSI/TIA 568 C.2 component requirements
  • White jacket with length label simplifies network colour-coding

Cat6 shielded patch cable for structured cabling

The Cables To Go 00921 is an eight-foot Category 6 patch cable with RJ-45 male connectors on both ends. Shielded construction and bonded pair geometry protect high-speed data from electromagnetic interference and near-end crosstalk. Each unit is tested to ANSI/TIA 568 C.2 component requirements for reliable voice, data and video distribution. The white jacket suits clean, colour-coded installations.

Snagless boots and bonded pairs simplify termination

Moulded snagless boots prevent the locking tabs from catching during pulls through conduit or cable managers. Individual pairs are bonded to preserve twist spacing all the way to the plug, keeping impedance and structural return loss within spec. A length label on each cable aids quick identification during moves, adds or changes.

Durable white jacket and standard RJ-45 ends

High-quality cable stock and plugs resist wear from repeated patching in racks, wall plates or desktop switches. Shielding adds a ground path that reduces noise in electrically noisy environments. The eight-foot reach suits typical rack-to-patch-panel or workstation-to-outlet runs without excess slack. Connectors fit any standard RJ-45 port.

Highlights

  • Shielded design blocks noise and electromagnetic interference
  • Cat6 rated for bandwidth-intensive voice, data and video distribution
  • Snagless boots protect connector tabs during installation
  • Individually tested to meet ANSI/TIA 568 C.2 component requirements
  • White jacket with length label simplifies network colour-coding

Specifications

BrandC2G
TypeBanker Box
CatCategory 6
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length8 ft.
ColorWhite
Shipping weight0.11 kg
Package size178 × 127 × 13 mm

Questions about this item

Will the RJ-45 connectors or shielding need replacement after repeated plugging?

Snagless boots protect the locking tabs from breaking during repeated insertions, and the foil shield is integral to the cable jacket so no separate shielding maintenance is required.

What performance limit appears first on a sustained 8 ft Cat6 link?

The cable is tested to ANSI/TIA 568 C.2 Cat6 component requirements, so the installed link will meet Cat6 channel limits before the patch cord itself becomes the bottleneck.

Does the shielded construction make the cable run hotter or draw more power in all-day use?

No, the foil shield and bonded pairs are passive; they add no heat or power draw beyond the negligible resistance of the copper conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.