We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 shielded Ethernet cable 7 ft with RJ45 connectors

Cables To Go

Cables To Go 00920 Cat 6 shielded network ethernet cable 7 ft white

SKU CH-N56H-X3W7E MPN 00920

Shielded Cat 6 patch cable with snagless RJ45 connectors, 7 ft white, reduces interference for voice, data and video networks

  • TypeCategory 6
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length7 ft.
  • ColorWhite
  • Shielded Cat 6 construction blocks electromagnetic interference for cleaner data signals
  • Snagless RJ45 connectors prevent tab breakage during repeated insertions and removals
  • Bonded twisted-pair design maintains consistent spacing to reduce near-end crosstalk
  • Tested to ANSI/TIA 568 C.2 component requirements for verified Cat 6 performance
  • White jacket and individual length label simplify cable identification in dense installations

Seven-foot shielded Cat6 patch cable

This seven-foot shielded Cat6 patch cable uses RJ45 connectors on both ends to link network adapters, hubs, switches, routers and HDBaseT gear. The white jacket allows quick colour-coding in a rack or along a desk run. It is built for voice, data and video distribution where electromagnetic interference is a concern.

Sustained bandwidth with reduced crosstalk

The shielded construction and bonded pair design keep twist spacing consistent to the termination point, which minimises near-end crosstalk and structural return loss over the full run. Each cable is tested to meet ANSI/TIA 568 C.2 Cat6 component requirements, so throughput stays stable during long transfers or continuous streaming sessions.

Snagless boots and durable shielding

Snagless boots protect the locking tabs when cables are pulled through tight cable management channels or dense patch panels. The overall foil shield blocks external noise from power cables or fluorescent lighting. An individual length label on each cable simplifies inventory checks and future re-termination work.

Highlights

  • Shielded Cat 6 construction blocks electromagnetic interference for cleaner data signals
  • Snagless RJ45 connectors prevent tab breakage during repeated insertions and removals
  • Bonded twisted-pair design maintains consistent spacing to reduce near-end crosstalk
  • Tested to ANSI/TIA 568 C.2 component requirements for verified Cat 6 performance
  • White jacket and individual length label simplify cable identification in dense installations

Specifications

BrandC2G
Model00920
TypeCategory 6
Cat6
Connector ARJ45
Connector BRJ45
Length7 ft.
ColorWhite
ShieldedYes
FeaturesProtect a high speed network from noise and electromagnetic interference when connecting with our Snagless Shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimize
Shipping weight0.10 kg
Package size25 × 25 × 23 mm

Questions about this item

Does the shielding on this Cat 6 cable reduce heat or electrical noise during continuous use?

The STP shielding protects the signal from electromagnetic interference and crosstalk rather than managing heat; the cable itself draws no power and generates no measurable warmth.

What RJ45 ports must my existing equipment provide for this patch cable to connect?

Both ends use standard RJ45 connectors, so any switch, router, hub, network adapter or HDBaseT device with an RJ45 jack will accept the plug directly.

Will this 7 ft Cat 6 cable work reliably with older Cat 5e or Cat 5 ports on my current switch?

Yes — the RJ45 interface is backward compatible, so the cable will link at the highest speed the older ports support while still meeting ANSI/TIA 568 C.2 component requirements.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.