We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Cat6 shielded ethernet cable with RJ45 connectors, 30 ft long

Cables To Go

Cables To Go 00874 Cat6 shielded network ethernet cable 30 ft yellow

SKU CH-1M63-XNHE6 MPN 00874

Shielded Cat6 patch cable with snagless RJ45 connectors resists EMI/RFI interference over 30 ft

  • TypeNetwork Cable
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length30 ft.
  • ColorYellow
  • Shielded construction blocks EMI and RFI noise in busy environments
  • Cat 6 rating supports gigabit speeds across the full 30 ft run
  • Snagless boots protect the RJ45 clips during frequent connects and disconnects
  • Yellow jacket makes the cable easy to trace in crowded racks
  • 14 m length reaches distant switches without excess slack

30 ft Cat6 shielded patch cable

This 30-foot Cat6 Ethernet cable uses RJ45 connectors on both ends and includes full shielding to protect against electromagnetic and radio-frequency interference. It is built for network adapters, switches, routers, modems and patch panels in environments where signal noise is a concern. The yellow jacket makes the run easy to identify in crowded racks or wall plates.

Snagless boots and STP construction

Snagless moulded boots prevent the locking tabs from catching during installation or removal, reducing the risk of broken connectors. The shielded twisted-pair design maintains signal integrity over the full 30 ft length when routed near power cables, fluorescent lighting or industrial equipment. These features together support reliable Gigabit Ethernet performance in high-noise settings.

30 ft maximum run length

The cable is specified at 30 feet (9.14 metres), which sets the maximum distance between two connected devices without adding a switch or extender. Buyers needing longer single runs, or those installing in plenum spaces that require a different fire rating, should look for alternative cable types.

Highlights

  • Shielded construction blocks EMI and RFI noise in busy environments
  • Cat 6 rating supports gigabit speeds across the full 30 ft run
  • Snagless boots protect the RJ45 clips during frequent connects and disconnects
  • Yellow jacket makes the cable easy to trace in crowded racks
  • 14 m length reaches distant switches without excess slack

Specifications

BrandC2G
Model00874
TypeNetwork Cable
Cat6
Connector ARJ45
Connector BRJ45
Length30 ft.
ColorYellow
ShieldedYes
FeaturesProtect from EMI/RFI interference; connect network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking applications in high noise environments.
Shipping weight1.32 kg
Package size165 × 152 × 43 mm

Questions about this item

Will the RJ45 connectors on this 30 ft shielded Cat6 cable need replacing after repeated plugging and unplugging?

The snagless boots protect the locking tabs from breaking off during insertion or removal, so the connectors themselves rarely need replacement unless the tab is physically snapped.

What length limit appears first when this 30 ft Cat6 cable is used in a permanent link?

At 30 ft the cable is well within the permanent-link maximum for Cat6, so the installed length is not the limiting factor.

Does the shield on this 30 ft yellow Cat6 cable make it run hotter or draw more power during all-day use?

The foil shield is passive; it adds no power draw and no measurable heat, so temperature and energy use stay the same as an unshielded patch cord.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.