We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black shielded Cat6 Ethernet cable with snagless RJ45 connectors, 9 ft length

Cables To Go

Cables To Go 00816 Cat6 Shielded Ethernet Cable 9 ft Black

SKU CH-8EX2-044DQ MPN 00816

Shielded Cat6 patch cable with snagless RJ45 connectors protects high-speed networks from interference over a 9 ft run

  • TypeBanker Box
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length9 ft.
  • ColorBlack
  • Shielded design blocks electromagnetic interference for clean data transmission
  • Snagless connectors prevent tab damage during frequent plugging and unplugging
  • Cat6 rating supports high-speed voice, data and video applications
  • Bonded twisted pairs maintain consistent spacing to reduce crosstalk
  • Factory tested to ANSI/TIA 568 C.2 Cat6 component requirements

Shielded Cat6 patch cable for interference-free runs

The Cables To Go 00816 is a nine-foot, black Cat6 patch cable with foil shielding and RJ45 connectors on both ends. It suits installers who need a manufactured lead that resists electromagnetic noise in voice, data or video distribution. Buyers who require an unshielded cable or a different length category should look elsewhere.

Tested to ANSI/TIA 568 C.2 component requirements

Each cable is fully tested to meet the ANSI/TIA 568 C.2 Cat6 component specification. Bonded pair construction maintains twist spacing to the termination point, minimising Near-End Crosstalk and reducing impedance and structural return loss under sustained bandwidth-intensive loads. The shielded design protects signal integrity where electromagnetic interference is present.

Snagless boots and labelled length simplify

Snagless boots protect the locking tabs during routing through cabinets or trunking, while an individual length label on each cable aids identification in dense patches. The RJ45 plugs follow standard pin-out for straight-through wiring. Installers needing crossover pin-out or non-standard wiring will need a different cable assembly.

Highlights

  • Shielded design blocks electromagnetic interference for clean data transmission
  • Snagless connectors prevent tab damage during frequent plugging and unplugging
  • Cat6 rating supports high-speed voice, data and video applications
  • Bonded twisted pairs maintain consistent spacing to reduce crosstalk
  • Factory tested to ANSI/TIA 568 C.2 Cat6 component requirements

Specifications

BrandC2G
Model00816
TypeBanker Box
Cat6
Connector ARJ45
Connector BRJ45
Length9 ft.
ColorBlack
ShieldedYes
FeaturesProtect a high speed network from noise and electromagnetic interference when connecting with our Snagless Shielded Cat6 patch cable. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimize
Shipping weight0.06 kg
Package size203 × 127 × 25 mm

Questions about this item

Does the Cat6 shielded cable produce any audible noise or heat when running continuously?

The cable is a passive copper assembly with no active components, so it generates no audible noise and negligible heat during continuous use.

What devices with RJ45 ports must I already own to use this 9 ft patch cable?

You need two RJ45-equipped devices — such as a router, switch, PC, NAS, or IP camera — to plug each end into.

Will this Cat6 shielded cable work with my existing Cat5e wall jacks and gigabit switch?

Yes, the RJ45 connectors are backward compatible with Cat5e jacks and gigabit switches, and the shielding helps reduce interference on the link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.