We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black shielded Cat6 patch cable with snagless connectors

Cables To Go

Cables To Go 00813 network ethernet cable

SKU CH-EBSC-VNKPW MPN 00813

A shielded Cat6 patch cable with snagless connectors, tested to ANSI/TIA 568 C.2 component requirements for reliable gigabit network links

  • Snagless boot protects the latch during repeated connections
  • Shielded twisted-pair construction blocks electromagnetic interference on busy networks
  • Cat6 rated bandwidth supports voice, data and video distribution
  • Bonded pair design maintains twist spacing to the termination point
  • Tested to ANSI/TIA 568 C.2 component requirements

Cat6 Shielded Patch Cable

This snagless shielded Cat6 patch cable connects network adapters, hubs, switches, routers and HDBaseT equipment. The shielded construction protects high-speed signals from noise and electromagnetic interference. Each unit is tested to meet ANSI/TIA 568 C.2 component requirements. Bonded pairs maintain twist spacing to the termination point for consistent performance.

Snagless Boot Design

The snagless boot prevents the locking tab from catching on adjacent cables during installation or removal. Shielded connectors require proper grounding at both ends to realise the interference-reduction benefit; an ungrounded shield can act as an antenna. Bonded pair construction reduces flexibility slightly compared with standard stranded patch leads, so allow a gentle bend radius when routing.

Six-Foot Length for Rack Links

At six feet the cable suits typical rack-to-rack or device-to-panel runs within a cabinet. It handles bandwidth-intensive voice, data and video distribution while reducing impedance and structural return loss. The fixed length cannot be extended without introducing additional connectors and potential signal degradation; longer runs will require a separate cable. Buyers needing extended distances or in-wall rated jackets should look elsewhere.

Highlights

  • Snagless boot protects the latch during repeated connections
  • Shielded twisted-pair construction blocks electromagnetic interference on busy networks
  • Cat6 rated bandwidth supports voice, data and video distribution
  • Bonded pair design maintains twist spacing to the termination point
  • Tested to ANSI/TIA 568 C.2 component requirements

Specifications

BrandC2G
Shipping weight0.10 kg
Package size229 × 127 × 13 mm

Questions about this item

How can I verify the cable meets the ANSI/TIA 568 C.2 Cat6 component requirements after connecting it?

The cable is fully tested by the manufacturer to meet those requirements, and each pair is bonded to maintain twist-spacing up to the termination point, which minimises Near-End Crosstalk levels.

What accessories are included with the C2G 00813 cable and what must be purchased separately?

Only the 6 ft snagless shielded Cat6 patch cable is included; network adapters, hubs, switches, routers or HDBaseT equipment are not supplied.

Which version of this shielded Cat6 patch cable should I choose for a standard Gigabit Ethernet link?

The 00813 model is a black, 6 ft snagless shielded Cat6 cable rated for ANSI/TIA 568 C.2 component requirements, suitable for typical voice, data and video distribution.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.