We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue shielded Cat6 patch cable with snagless RJ45 connectors six feet long

Cables To Go

Cables To Go 00796 6ft Cat6 Snagless Shielded (STP) network ethernet cable Blue

SKU CH-7EQX-MDK3Q MPN 00796

A 6 ft shielded Cat6 patch cable with gold-plated RJ-45 connectors tested to ANSI/TIA 568 C.2 for low crosstalk and interference resistance

  • TypeConsumer Electronics
  • Cat6 performance for high-speed data transfer
  • Shielded design blocks electromagnetic interference
  • Snagless connectors protect tabs during installation
  • Gold-plated contacts ensure reliable signal quality
  • 6 ft length suits typical desktop connections

Ideal patch cable for shielded Cat6 runs

This six-foot shielded Cat6 patch cable connects network adapters, hubs, switches, routers and HDBaseT equipment with gold-plated and nickel-plated RJ-45 male connectors. Each pair is bonded to preserve twist spacing up to the termination point, minimising near-end crosstalk. The snagless boot protects the latch during installation and removal. It is fully tested to meet ANSI/TIA 568 C.2 component requirements.

Shielded construction rejects EMI in normal use

The overall shield guards high-speed signals from electromagnetic interference and noise across the link. Bonded pairs and quality plugs keep impedance and structural return loss low during everyday operation. No active components are present, so the cable draws no power and produces no acoustic noise.

Six-foot length sets the reach limit

At exactly six feet this cable suits short rack-to-device or desk-to-wall connections; longer runs will require a different length. Buyers needing extended distances or in-wall rated jackets cannot use this patch cable. The fixed RJ-45 male ends also prevent field re-termination.

Highlights

  • Cat6 performance for high-speed data transfer
  • Shielded design blocks electromagnetic interference
  • Snagless connectors protect tabs during installation
  • Gold-plated contacts ensure reliable signal quality
  • 6 ft length suits typical desktop connections

Specifications

BrandC2G
TypeConsumer Electronics
Shipping weight0.10 kg
Package size178 × 127 × 13 mm

Questions about this item

How do I install this Cat6 snagless shielded cable without damaging the RJ-45 connectors?

Press the RJ-45 male plugs straight into the network device ports until the snagless latch clicks; the bonded pair construction keeps twist spacing intact to the termination point, so avoid bending the cable sharply behind the connector.

What maintenance or replacement will this shielded patch cable need over time?

Inspect the gold-plated and nickel-plated contacts for oxidation and reseat the plugs if link errors appear; the shielded design reduces electromagnetic interference, but physical strain on the 6 ft length can degrade NEXT performance eventually.

What limit appears first when this Cat6 cable runs sustained high-throughput traffic?

The ANSI/TIA 568 C.2 Cat6 component rating governs bandwidth-intensive voice, data and video distribution; sustained loads are bounded by the cable's tested Near-End Crosstalk and structural return loss margins rather than length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.