We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6a shielded Ethernet patch cable, 9 ft, snagless RJ45 connectors

Cables To Go

Cables To Go 00714 Cat6a network ethernet cable 9 ft black

SKU CH-GH91-8R5EJ MPN 00714

Shielded Cat6a patch cable with snagless RJ-45 connectors for 10 Gigabit Ethernet links, tested to ANSI/TIA 568 C.2

  • TypeCategory 6a
  • CatCategory 6a
  • Connector A1 x RJ-45 Male Network
  • Connector B1 x RJ-45 Male Network
  • Length9 ft.
  • ColorBlack
  • Cat6a rating supports 10 Gigabit network speeds
  • Shielded construction reduces electromagnetic interference on the line
  • Snagless boots protect RJ-45 clips during installation
  • Each cable tested to ANSI/TIA 568 C.2 Cat6a requirements
  • Bonded pair design maintains twist spacing to the termination point

Cat6a shielded patch cable for 10 GbE runs

This Cat6a patch cable carries 10 Gigabit Ethernet over a 9 ft shielded run. Snagless boots protect the RJ-45 clips during routing. The construction meets ANSI/TIA 568 C.2 component requirements for Cat6a performance. Bonded pairs preserve twist spacing to the termination point for consistent signal quality.

Verify port speed and shielding needs

Confirm the connected ports support 10GBase-T operation to use the cable’s rated bandwidth. Shielded cables require grounded equipment at both ends for the screen to function correctly. The RJ-45 connectors fit standard Ethernet jacks on switches, routers, servers and patch panels. Cable length is fixed at 9 ft, so measure the route before ordering.

Stable throughput on long 10G links

Shielding and bonded-pair geometry suppress alien crosstalk and electromagnetic interference over the full link. Reduced impedance variation and structural return loss keep the 10 GbE signal clean during sustained transfers. The cable is fully tested to Cat6a component limits, so extended backup or streaming loads remain error-free. Snagless boots stay secure in dense patch-panel environments.

Highlights

  • Cat6a rating supports 10 Gigabit network speeds
  • Shielded construction reduces electromagnetic interference on the line
  • Snagless boots protect RJ-45 clips during installation
  • Each cable tested to ANSI/TIA 568 C.2 Cat6a requirements
  • Bonded pair design maintains twist spacing to the termination point

Specifications

BrandC2G
TypeCategory 6a
CatCategory 6a
Connector A1 x RJ-45 Male Network
Connector B1 x RJ-45 Male Network
Length9 ft.
ColorBlack
Shipping weight0.23 kg
Package size203 × 203 × 51 mm

Questions about this item

What comes with the Cables To Go 00714 Cat6a cable and do I need to buy connectors separately?

The cable arrives with RJ-45 male plugs already fitted on both ends, so no extra connectors are required for a standard network patch.

Should I choose the 9 ft black version or a different length for a 10 GbE link?

The 9 ft (2.74 m) black model meets ANSI/TIA 568 C.2 Cat6a component requirements and supports 10GBase-T, making it suitable for typical rack or desk runs.

What does the Cat6a rating mean for real-world throughput on my switch?

The Cat6a construction with bonded pairs and individual shielding is fully tested for 10 Gigabit Ethernet, keeping crosstalk and return loss within spec for reliable 10 Gbps operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.