We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue shielded Cat6a patch cable 35 ft with snagless connectors

Cables To Go

Cables To Go 00688 Cat6a STP Snagless 35 ft network ethernet cable Blue

SKU CH-0VFM-GG3HZ MPN 00688

A 35 ft shielded Cat6a patch cable with snagless connectors, tested to ANSI/TIA 568 C.2 for 10 Gigabit networks

  • TypeConsumer Electronics
  • Length35 ft.
  • ColorBlue
  • Supports 10 Gigabit speeds for bandwidth-intensive applications
  • Shielded twisted-pair construction blocks noise and electromagnetic interference
  • Snagless boot protects the connector tab during installation
  • Individually tested to meet ANSI/TIA 568 C.2 Cat6a requirements
  • Bonded pair design maintains twist spacing to the termination point

35 ft Cat6a Shielded Cable

This 35 ft Cat6a shielded patch cable carries 10 Gigabit Ethernet signals for network adapters, switches, routers and patch panels. The STP construction protects the link from noise and electromagnetic interference. Each pair is bonded to preserve twist spacing up to the connector. The cable meets ANSI/TIA 568 C.2 component requirements.

Suited for high-speed wired links not for fiber

Installers who need a tested 10 Gigabit copper link over 35 ft will find the shielding and pair bonding preserve signal quality. Buyers who require fiber optic cabling or wireless connectivity should choose a different medium. The snagless boots ease routing but do not change the cable category.

Category 6a rated for 10 Gigabit

The single specification that decides fit is the Cat6a rating verified to ANSI/TIA 568 C.2 for 10 Gigabit Ethernet. If the installation demands that category the cable qualifies; if a lower or higher category is required this part will not match.

Highlights

  • Supports 10 Gigabit speeds for bandwidth-intensive applications
  • Shielded twisted-pair construction blocks noise and electromagnetic interference
  • Snagless boot protects the connector tab during installation
  • Individually tested to meet ANSI/TIA 568 C.2 Cat6a requirements
  • Bonded pair design maintains twist spacing to the termination point

Specifications

BrandC2G
TypeConsumer Electronics
Length35 ft.
ColorBlue
Shipping weight0.91 kg
Package size152 × 102 × 51 mm

Questions about this item

What equipment do I need to use this 35 ft Cat6a shielded cable?

Connect it to 10GBase-T ports on network adapters, switches, routers, DSL or cable modems, hubs or patch panels.

Will this Cat6a cable work with my existing Cat5e or Cat6 devices?

Yes, it is backwards compatible and will operate at the speed of the connected equipment.

How can I verify the cable meets Cat6a performance after installation?

Each cable is fully tested to ANSI/TIA 568 C.2 Cat6a component requirements and carries an individual length label.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.