We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat5e Ethernet patch cable with snagless RJ45 connectors, 35 ft length

Cables To Go

Cables To Go 00409 Cat5e network ethernet cable 35 ft black

SKU CH-26VR-DPBE7 MPN 00409

A 35 ft black Cat5e patch cable with snagless RJ45 connectors rated for 350 MHz bandwidth

  • Cat5E
  • Connector ARJ45 Male
  • Connector BRJ45 Male
  • Length35 ft.
  • ColorBlack
  • FeaturesFor voice/data/video distribution, this cable will handle ba
  • 35 ft length suits long cable runs
  • 350 MHz bandwidth supports voice, data and video
  • Snagless boot prevents catches during installation
  • Bonded pair construction reduces near-end crosstalk
  • Meets Cat5e TIA/EIA standards for reliable performance

35-foot Cat5e patch cable

This 35-foot Cat5e patch cable connects network devices with RJ45 male connectors on each end. It supports voice, data and video distribution for bandwidth-intensive applications up to 350 MHz. The black jacket and snagless boots suit home, office or rack installations where a medium-length link is required.

Cat5e standard limits

The Cat5e rating guarantees performance up to 100 MHz under TIA/EIA standards, while this cable is tested to 350 MHz for extra margin. Maximum segment length for gigabit Ethernet remains 100 metres, so the 10.66-metre length stays well within that limit. Unshielded construction means it is best used away from strong electromagnetic interference sources.

Upgrading from older cables

This cable replaces Cat5 or lower-grade patch leads that cannot reliably carry gigabit speeds. The bonded-pair design and reduced near-end crosstalk make the jump worthwhile when moving from 100 Mbps links to 1 Gbps or when existing cables show intermittent errors. It does not add shielding, so environments that require screened twisted pair will need a different product.

Highlights

  • 35 ft length suits long cable runs
  • 350 MHz bandwidth supports voice, data and video
  • Snagless boot prevents catches during installation
  • Bonded pair construction reduces near-end crosstalk
  • Meets Cat5e TIA/EIA standards for reliable performance

Specifications

BrandC2G
Model00409
Cat5E
Connector ARJ45 Male
Connector BRJ45 Male
Length35 ft.
ColorBlack
FeaturesFor voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz.
Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
The molded, snagless boot prevents unwanted cable snags during installation and
Shipping weight0.37 kg
Package size184 × 165 × 32 mm

Questions about this item

Is the 35 ft length right for my desk-to-router run?

At 35 ft (10.66 m) this patch cable covers typical room-to-room or desk-to-switch distances without excess slack.

What does the 350 MHz rating mean for my Gigabit network?

The 350 MHz bandwidth supports Gigabit Ethernet and other high-throughput applications well above the 100 MHz baseline of standard Cat5e.

Will the RJ45 connectors work with my switch and PC ports?

Both ends use standard RJ45 male plugs that fit any Cat5e-compatible router, switch, patch panel or network card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.