We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and white sleeved PCIe cable with 90 degree 12V-2x6 connector, 60cm length

CableMod Pro ModFlex 12V-2x6 90° PCIe Cable 60cm

SKU CH-7AM1-4JAMK

A 60 cm 12V-2x6 PCIe cable with a 90° connector, 16 AWG wiring for 600 W delivery and StealthSense technology for clean cable management

  • TypeComponent
  • Connector A8 Pin PCIe
  • ColorBlack + White
  • Features, , , ,
  • ATX 3.1 ready PSU compatibility via 16-pin 12V-2x6 connector
  • 90° angled connector enables cleaner routing in tight chassis spaces
  • 16AWG wiring supports 600W power delivery to graphics cards
  • StealthSense technology hides sense wires inside connector for cleaner look
  • Pre-installed closed cable combs keep sleeved wires neatly aligned

ATX 3.1 12V-2x6 90° Cable

The CableMod Pro ModFlex cable connects an ATX 3.1 ready power supply to a graphics card with a 12V-2x6 or 12VHPWR port. A 90 degree 16-pin connector on one end plugs into the GPU while a 16-pin Microfit connector on the other end plugs into the PSU. The 60cm length suits standard tower builds. It is built for enthusiasts who want a clean, direct replacement cable.

Build Fit And Cable Management

The 16AWG wiring supports up to 600W of power delivery for modern high-end graphics cards. Pre-installed closed cable combs keep the sleeved wires aligned without extra effort. StealthSense technology hides the sense-wire bridge inside the 90 degree connector, removing the external wire loops found on other cables. This frees up space around the GPU port and improves airflow in tight layouts.

Upgrade From Standard 12VHPWR Cables

This cable replaces the basic 12VHPWR cable bundled with many power supplies. The jump is worth it when the stock cable blocks a side panel, forces a sharp bend, or leaves visible sense-wire loops that ruin a clean aesthetic. The 90 degree angle and hidden sensing solve both clearance and appearance issues in one step. It is not for builders who need a straight connector or a different cable length.

Highlights

  • ATX 3.1 ready PSU compatibility via 16-pin 12V-2x6 connector
  • 90° angled connector enables cleaner routing in tight chassis spaces
  • 16AWG wiring supports 600W power delivery to graphics cards
  • StealthSense technology hides sense wires inside connector for cleaner look
  • Pre-installed closed cable combs keep sleeved wires neatly aligned

Specifications

BrandCableMod
TypeComponent
Connector A8 Pin PCIe
ColorBlack + White
Features, , , ,

Questions about this item

Will the 16 AWG wires and 90 degree 12V-2x6 connector handle sustained 600 W loads without overheating?

The 16 AWG wiring is rated for 600 W delivery and the 90 degree 12V-2x6 connector uses StealthSense technology to eliminate sense wires, reducing resistance and heat under continuous load.

Does the 90 degree connector orientation and ModFlex sleeving keep noise and heat low during all-day operation?

The 90 degree 12V-2x6 connector removes external sense-wire loops, improving airflow around the GPU port, while the ModFlex sleeving stays flexible for tidy routing that does not trap heat.

Must my power supply have a 16-pin Microfit PCIe port and be ATX 3.1 ready for this 60 cm cable to work?

Yes, the cable connects a PSU-side 16-pin Microfit PCIe socket to a GPU-side 12V-2x6 or 12VHPWR port and is designed for ATX 3.1 ready power supplies.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.