We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four-foot gray Cat6 patch cable with snagless RJ45 connectors

CableMAX

CableMAX 4ft Gray Cat6 Snagless Ethernet Patch Cable 24AWG 550MHz Stranded UTP

SKU CH-41QR-5W7V9

A 4 ft Cat6 patch cable with snagless boots, 24 AWG stranded conductors and 50 µm gold-plated staggered pins rated for 550 MHz

  • Connector ARJ45
  • Connector BRJ45
  • ColorGray
  • Cat6 550 MHz rating supports Gigabit Ethernet speeds
  • Snagless bubble boots protect RJ45 tabs during installation
  • 24 AWG stranded conductors with 50 micron gold contacts
  • ETL verified to TIA 568B for reliable performance
  • Backwards compatible with Cat5e and Cat5 networks

CableMAX Cat6 4ft Patch Cable

This CableMAX Cat6 patch cable measures four feet and uses stranded UTP construction rated at 550 MHz. It is built for gigabit Ethernet links in home or office networks. The grey jacket and snagless boots suit tidy desktop or patch-panel runs.

Thermals Noise and Power

As a passive copper cable it draws no power and generates no heat or noise during operation. The 24 AWG conductors and CM fire rating meet standard in-wall safety requirements. Signal integrity is maintained across the full 550 MHz bandwidth without active components.

Connectors and Daily Use

Each end carries an RJ45 plug with 50 micron gold-plated staggered pins to limit cross-talk. Moulded bubble boots protect the latch from snags when routing through cable managers. The TIA 568B wiring and ETL verification ensure compatibility with Cat5e and Cat5 infrastructure.

Highlights

  • Cat6 550 MHz rating supports Gigabit Ethernet speeds
  • Snagless bubble boots protect RJ45 tabs during installation
  • 24 AWG stranded conductors with 50 micron gold contacts
  • ETL verified to TIA 568B for reliable performance
  • Backwards compatible with Cat5e and Cat5 networks

Specifications

Connector ARJ45
Connector BRJ45
ColorGray

Questions about this item

How do I install the snagless RJ45 connectors on this 4ft Cat6 patch cable, and what step do people often miss?

Press each RJ45 plug firmly until the latch clicks into the port; the staggered pin layout and 50 micron gold plating only make full contact when the connector is fully seated, and the bubble boot prevents the latch from catching on adjacent cables during removal.

What maintenance or replacement will this stranded 24AWG Cat6 cable need over time?

Inspect the bubble boots and latch tabs periodically; if a boot tears or a latch snaps off, replace the cable because the stranded conductors and snagless design cannot be repaired once the mechanical protection is lost.

What limit appears first when this 550 MHz Cat6 cable runs sustained Gigabit traffic?

The 4ft length keeps attenuation well within the Category 6 channel budget, so the first practical limit is the 550 MHz bandwidth ceiling of the cable itself rather than distance-related signal loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.