We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-foot SJT power cord with IEC C20 male and C19 female connectors

Cablelera ZWACFGAB-06 IEC C20 to C19 Power Cord 12AWG 20A 250V 6ft

SKU CH-V03S-F596N

A 6 ft heavy-duty 12 AWG extension cord connects IEC C20 outlets to IEC C19 inlets at 20 A, 250 V for servers, PDUs and UPS units

  • Typetype
  • Length6 Feet
  • Connector NumberMale-to-Female
  • Terminal GenderMale to Female
  • SpecificationsCablelera, 250 volts, 6, feet, Male-to-Female, false
  • FeaturesMale-to-Female, false, 250 volts, 6
  • Extends power for high-current C19 gear using IEC C20 to C19 connectors
  • Heavy-duty 12AWG build rated 20A 250V for enterprise servers and PDUs
  • 6 ft SJT cord measured end-to-end including connectors for precise rack planning
  • UL/cUL listed and RoHS compliant materials meet safety and environmental standards
  • Male-to-female extension adds reach without changing inlet or outlet type

Power Extension for C19 Equipment

This IEC C20 to C19 cord extends power connections for servers, UPS units and PDUs that require a high-current inlet. It is built for equipment fitted with a C19 connector and rated for 20A at 250V. The 6ft length suits rack or cabinet runs where the source outlet is a C20 socket. It is not compatible with C13 or C14 devices.

Heavy-Duty 12AWG Construction and Connectors

The cable uses 12AWG SJT stranded thermoplastic jacket rated for the full 20A load. Male C20 and female C19 ends are moulded for secure insertion and strain relief. UL/cUL listing and RoHS compliance confirm the materials meet recognised safety and environmental standards. The male-to-female layout adds reach without changing the connector gender at the equipment end.

Practical Limits of the IEC 320 C19/C20 Interface

The IEC 320 C19/C20 pair is defined for up to 20A at 250V, so this cord cannot serve loads beyond that rating. Length is fixed at 6ft end-to-end; longer runs need a different cable. Only equipment with a C19 inlet can use the female end — C13 inlets will not fit. Verify both connector type and circuit rating before installation.

Highlights

  • Extends power for high-current C19 gear using IEC C20 to C19 connectors
  • Heavy-duty 12AWG build rated 20A 250V for enterprise servers and PDUs
  • 6 ft SJT cord measured end-to-end including connectors for precise rack planning
  • UL/cUL listed and RoHS compliant materials meet safety and environmental standards
  • Male-to-female extension adds reach without changing inlet or outlet type

Specifications

BrandCablelera, cablelera
ModelZWACFGAB-06
Typetype
Length6 Feet
Connector NumberMale-to-Female
Terminal GenderMale to Female
SpecificationsCablelera, 250 volts, 6, feet, Male-to-Female, false
FeaturesMale-to-Female, false, 250 volts, 6
Disclaimerfalse

Questions about this item

What does the IEC 320 C20 to C19 connection support in practice?

It extends power between a C20 outlet and a C19 inlet at up to 20 A and 250 V, using 12 AWG conductors rated for high-current server, PDU or UPS equipment.

What clearance does the 6 ft cord need to fit in a rack or cabinet?

The end-to-end length is 6 ft (1.83 m) including both connectors; usable length depends on routing, so measure the path before ordering.

How is the cord installed and what step is often missed?

Plug the C20 male end into the outlet and the C19 female end into the device inlet, verifying both are C20/C19 — not C13/C14 — before powering on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.