We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8644 Mini SAS HD connector fanning out to four SATA 7-pin plugs, black mesh-sleeved cable 3.3 FT long

CableCreation

CableCreation SFF-8644 to 4 SATA 7 Pin Cable 3.3 FT External Mini SAS HD

SKU CH-GTDP-26TCV

Connects an SFF-8644 Mini SAS HD port to four SATA drives for 6 Gb/s data transfer

  • Connects HBA card to four SATA drives
  • 3 ft length suits server chassis routing
  • Supports up to 6 GB/s data rate
  • SAS 2.1 compliant for broad RAID compatibility
  • Woven mesh sheath with locking latches aids airflow

External Mini SAS HD cable

This 3.3 FT cable connects an SFF-8644 host port to four SATA drives. It is built for servers and RAID arrays that need a fan-out from a single HBA connector. The woven mesh sheath and locking latches keep airflow clear during 24/7 operation.

For RAID and HBA deployments

The cable suits administrators adding SSD or HDD capacity to a controller with an external SFF-8644 interface. It is not suited for systems that only provide internal mini SAS ports or different external connector types. Builders needing a direct SATA-to-SATA link should choose a different cable.

36-pin SFF-8644 host connector

The single specification that decides fit is the 36-pin SFF-8644 plug on the host side. If your controller presents this exact external Mini SAS HD port, the cable will carry data at up to 6 GB/s under SAS 2.1 compliance.

Highlights

  • Connects HBA card to four SATA drives
  • 3 ft length suits server chassis routing
  • Supports up to 6 GB/s data rate
  • SAS 2.1 compliant for broad RAID compatibility
  • Woven mesh sheath with locking latches aids airflow

Specifications

No published specifications for this item yet.

Questions about this item

Does the 3.3 FT cable include the four SATA drives or just the SFF-8644 to 4 SATA breakout cable itself?

The package contains only the SFF-8644 to 4 SATA breakout cable; drives must be purchased separately.

Which SAS specification does the SFF-8644 connector follow and what data rate does it support?

The connector follows SAS 2.1 and supports up to 6 GB/s per lane.

Will the 6 GB/s headline rate be reached when the cable connects an HBA card to four SATA SSDs?

Each SATA lane runs at up to 6 GB/s, but the actual throughput depends on the drive and controller capabilities.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.