We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8644 Mini SAS HD plug splitting into four SATA 7-pin connectors with woven mesh sleeve

CableCreation

CableCreation SFF-8644 to 4 SATA 7 Pin Cable 3.3 FT

SKU CH-R0X2-JERZX

Connects an SFF-8644 HBA card to four SATA drives with a 3.3 FT cable supporting 6 GB/s data rates

  • Connects HBA cards to four SATA drives
  • Supports data rates up to 6 GB/s
  • SAS 2.1 compliant for reliable server use
  • Locking latches and mesh sheath improve airflow
  • 3 ft length suits typical chassis layouts

SFF-8644 to four SATA 3.3 ft cable

This new CableCreation cable connects an SFF-8644 HD Mini SAS 36-pin host port on an HBA card to four SATA 7-pin drives such as SSDs or HDDs. It supports data rates up to 6 GB/s and complies with SAS 2.1. A woven mesh sheath and locking connector latches reduce airflow restriction inside the case.

Suits builders adding multiple SATA drives

Not for installations that require a different host connector or more than four SATA breakout connections. Buyers needing longer runs or alternative fan-out counts should look at other cable configurations.

36-pin SFF-8644 host connector

The 36-pin SFF-8644 interface and SAS 2.1 rating determine whether the cable matches the host controller and the desired 6 GB/s link speed. Verify the HBA port type before purchase.

Highlights

  • Connects HBA cards to four SATA drives
  • Supports data rates up to 6 GB/s
  • SAS 2.1 compliant for reliable server use
  • Locking latches and mesh sheath improve airflow
  • 3 ft length suits typical chassis layouts

Specifications

No published specifications for this item yet.

Questions about this item

What maximum data rate does the SFF-8644 to 4 SATA cable support under sustained use?

The cable is rated for up to 6 GB/s and complies with SAS 2.1, so sustained throughput is limited by that specification.

How does the woven mesh sheath affect heat and airflow when the cable runs all day in a server chassis?

The woven mesh sheath is designed to minimise impact on airflow, helping maintain efficient cooling during continuous 24/7 operation.

Which host-side connector must the system already have for this cable to plug in?

The host end requires an SFF-8644 HD Mini SAS 36-pin port, typically found on an HBA or RAID controller card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.