We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8643 connector branching to four SATA plugs, 0.5 m black cable

CableCreation

CableCreation SFF-8643 to 4× SATA cable 0.5 m

SKU CH-E8G3-A5H0A

Connects a Mini SAS SFF-8643 host port to four SATA drives at 12 Gb speeds

  • Connect RAID controller to four SATA drives via SFF-8643 host port
  • 5 m length keeps internal cabling tidy and airflow clear
  • Supports 12 Gb SAS speeds for high-throughput storage arrays
  • SFF-8643 connector reduces PCB footprint for denser port layouts
  • Four 7-pin SATA targets attach directly to hard drives or SSDs

SFF-8643 host to four SATA 0.5 m cable

This internal cable connects a motherboard or RAID controller with an SFF-8643 host port to up to four SATA hard drives or SSDs. The 0.5 m length suits tight chassis routing. It carries SAS 12 Gb/s signals to each SATA target device.

Builders with SFF-8643 host ports only

Suits systems where the controller or motherboard presents an SFF-8643 host connector. Not for backplanes or enclosures that expose an SFF-8643 target port, because the pin-out direction is opposite. Buyers who need a longer reach or a different connector orientation should look elsewhere.

SFF-8643 host connector direction

The cable works only when the SFF-8643 side plugs into a host port on a controller or motherboard. If the same connector appears on a backplane as a target, the cable will not function. Verify the port role before purchase.

Highlights

  • Connect RAID controller to four SATA drives via SFF-8643 host port
  • 5 m length keeps internal cabling tidy and airflow clear
  • Supports 12 Gb SAS speeds for high-throughput storage arrays
  • SFF-8643 connector reduces PCB footprint for denser port layouts
  • Four 7-pin SATA targets attach directly to hard drives or SSDs

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the SFF-8643 host end is linked correctly after connecting four SATA drives?

The controller BIOS or operating system should detect each attached drive at full 12 Gb/s SAS speed once the cable is seated.

What comes with the cable and what extra parts are needed?

Only the 0.5 m SFF-8643 to 4× SATA assembly is supplied; power cables and a compatible RAID controller or motherboard port must be provided separately.

Which length should I choose for a standard server chassis?

The 0.5 m (1.6 ft) version fits typical internal routing between a motherboard Mini SAS port and nearby drive bays.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.