We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 6-inch SATA power splitters, 15-pin male to dual 90-degree female, black connectors

CableCreation

CableCreation SATA power splitter cable 15 pin male to 2x 15 pin 90 degree female 2 pack

SKU CH-386B-1CGQV

Two-pack of 15-pin SATA power splitters with 90-degree female connectors for adding drives in tight spaces

  • Powers two SATA drives from one supply connector using 15-pin splitter
  • 90-degree down-angle connectors improve routing in tight chassis spaces
  • Easy-grip treads on each plug simplify removal in cramped cases
  • Supplied as a 2-pack for multiple drive installations
  • 24-month replacement coverage included for defective units

Two-drive power splitter for SATA devices

This two-pack of SATA power splitter cables lets a single 15-pin supply connector feed two drives or PCI cards. Each splitter carries a straight male plug and two 90-degree female sockets. The right-angle design helps route cables cleanly in cramped drive bays or behind motherboard trays. Builders adding a second SSD or optical drive to a pre-built system will find the parts match the existing power loom.

Snug connectors with easy-grip treads

Moulded housings feature ridged treads that give a firm hold when plugging or unplugging in tight spaces. The 90-degree female ends reduce strain on drive ports and keep cables flush against chassis walls. No tools or adapters are required; the splitters seat directly onto standard SATA power leads. The two included cables provide spare reach for multiple drive locations.

One 15-pin male to two 15-pin female per cable

Each splitter accepts one 15-pin SATA power plug and branches to two 15-pin SATA sockets. The arrangement supports hard drives, SSDs, optical drives, DVD burners and PCI cards that draw power through the same connector. If a build needs more than two additional devices per supply lead, this splitter does not extend further.

Highlights

  • Powers two SATA drives from one supply connector using 15-pin splitter
  • 90-degree down-angle connectors improve routing in tight chassis spaces
  • Easy-grip treads on each plug simplify removal in cramped cases
  • Supplied as a 2-pack for multiple drive installations
  • 24-month replacement coverage included for defective units

Specifications

No published specifications for this item yet.

Questions about this item

Does the 15-pin SATA power splitter deliver enough current for two drives from one PSU connector?

The splitter passes the PSU rail's current to two SATA devices; total draw must stay within that rail's rating.

How much clearance does the 90-degree female connector need behind the drive?

The down-angle plug sits close to the drive body, so allow a few millimetres for the right-angle bend.

Is the connector keyed so it only goes in one way, and what is the usual mistake?

Yes, the L-shaped key prevents reverse insertion; the common error is forcing it before the key aligns.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.