We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten red SATA cables with locking latches coiled together

CableCreation

CableCreation SATA III cable 10-pack 18-inch 6.0 Gbps locking latch Red

SKU CH-FZ75-1B3RW

Ten SATA III cables with locking latches deliver 6.0 Gbps throughput for internal drives

  • SATA III 6.0 Gbps throughput for fast drive transfers
  • Backwards compatible with SATA I and SATA II devices
  • Locking latches on both ends prevent accidental disconnection
  • 18-inch length suits tidy internal cable routing
  • 10 cables in one pack for multiple drive builds

SATA III 10-pack for internal drives

This pack contains ten 18-inch SATA III cables rated for 6.0 Gbps throughput. They connect motherboards or host controllers to internal hard drives and optical drives. The cables are backwards compatible with SATA revision 1 and 2 devices.

Locking latch maintains steady signal

Spring-steel locking connectors on both ends prevent the cables from working loose during vibration or thermal cycling. The latch keeps each connection seated so sustained data transfers do not suffer from intermittent contact.

Simple push-on install with visible latch

Each cable plugs straight into a standard 7-pin SATA port; the red jacket makes routing easy to trace. The only common issue is forcing the connector upside down, which damages the latch — align the notch before pressing.

Highlights

  • SATA III 6.0 Gbps throughput for fast drive transfers
  • Backwards compatible with SATA I and SATA II devices
  • Locking latches on both ends prevent accidental disconnection
  • 18-inch length suits tidy internal cable routing
  • 10 cables in one pack for multiple drive builds

Specifications

No published specifications for this item yet.

Questions about this item

Does the SATA III cable generate heat or noise when used continuously?

These are passive data cables with no active components, so they produce no heat or noise during all-day operation.

What hardware must I already have to use these 18-inch SATA III cables?

You need a motherboard or host controller with a SATA port and an internal SATA hard drive or DVD drive to connect.

Will these SATA 3.0 cables work with my older SATA I and SATA II drives?

Yes, the cables are backwards compatible with SATA revision 1 and 2 devices while still supporting up to 6.0 Gbps throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.