We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CableCreation

CableCreation SATA III 6.0 Gbps Cable 5-Pack 18-inch Blue

SKU CH-J1KA-1YZ0H

Five SATA III cables with locking latches for 6 Gbps internal drive connections

  • 6 Gbps throughput with SATA III revision 3.0
  • Backwards compatible with SATA I and SATA II drives
  • Locking latch on each end prevents accidental disconnection
  • Straight-to-angled connectors suit tight case layouts
  • Five cables included for multi-drive builds

Five-Pack SATA III Data Cables

This five-pack supplies 18-inch SATA III cables rated for 6.0 Gbps throughput. Each cable uses a straight connector on one end and a right-angle connector on the other, both fitted with spring-steel locking latches. They connect motherboards or host controllers to internal hard drives and optical drives. The blue jacket makes them easy to identify inside a chassis.

Check Port Orientation and Clearance

Verify that your drive and motherboard ports accept a right-angle plug on the drive side and a straight plug on the board side. Measure the routing path to confirm 18 inches reaches without tension. Ensure no adjacent components block the angled connector or prevent the locking latch from engaging fully.

Replaces Worn or Non-Locking Cables

These cables replace older SATA leads that lack locking latches or have damaged clips. The upgrade is worthwhile when intermittent disconnects appear under vibration or when cable routing demands a secure right-angle fit. They do not add speed beyond the 6.0 Gbps SATA III limit already supported by the host and drive.

Highlights

  • 6 Gbps throughput with SATA III revision 3.0
  • Backwards compatible with SATA I and SATA II drives
  • Locking latch on each end prevents accidental disconnection
  • Straight-to-angled connectors suit tight case layouts
  • Five cables included for multi-drive builds

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the 5-pack and do I need anything else?

The pack contains five 18-inch SATA III cables with locking latches; no extra parts are required to connect drives.

Should I pick the 18-inch version or a different length?

Choose the 18-inch (1.5 ft) cables when drives sit close to the motherboard; longer cables are only needed for larger cases.

What does the 6.0 Gbps rating mean for my SSD or hard drive?

The cable supports SATA revision 3.0 at up to 6.0 Gbps, so a SATA III SSD or HDD will run at its full native speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.