We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CableCreation

CableCreation SATA III 6.0 Gbps cable 5-pack 0.6 ft blue

SKU CH-F7R5-GJ5GC

Five SATA III cables with locking latches support 6.0 Gbps data transfer for internal drives

  • SATA III 6.0 Gbps throughput for fast data transfer
  • Backwards compatible with SATA revision 1 and 3 for broad device support
  • Locking latch connectors prevent accidental disconnection during operation
  • Spring steel contacts ensure a rock-solid connection to drives
  • Five cables included for multiple drive installations

SATA III 6.0 Gbps cable 5-pack

This five-pack supplies short SATA III cables rated for 6.0 Gbps throughput. Each cable measures .6 ft and uses straight-to-straight 7-pin connectors with locking latches. The blue colour helps identify runs inside a chassis.

Builders adding multiple SATA drives

The cables suit builders who need several internal SATA connections in tight spaces. The short length reduces clutter when linking hard drives or optical drives to a motherboard or host controller. Buyers who need longer reach for full-tower layouts or external eSATA ports should look at something else.

Locking latch on every connector

A spring-steel locking latch on each end prevents the cable from working loose during vibration or transport. This single feature decides whether the part fits a build that demands a secure, vibration-resistant SATA link.

Highlights

  • SATA III 6.0 Gbps throughput for fast data transfer
  • Backwards compatible with SATA revision 1 and 3 for broad device support
  • Locking latch connectors prevent accidental disconnection during operation
  • Spring steel contacts ensure a rock-solid connection to drives
  • Five cables included for multiple drive installations

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 0.6 ft SATA III cable with locking latch?

Align the 7-pin straight connector with the motherboard or host controller port, push until the spring-steel latch clicks, then repeat on the drive side; the short length means you must route it before seating both ends.

What maintenance will the 5-pack of SATA III 6.0 Gbps cables need later?

No scheduled maintenance; inspect the locking latches during any hardware swap and replace a cable if the latch no longer clicks or if data errors appear.

What limit appears first under sustained use of the SATA revision 3.0 cable?

The 6.0 Gbps interface ceiling is reached before the cable itself degrades, so sustained throughput tops out at the SATA III spec.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.