We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short red SATA cables, one straight and one right-angle, with black locking latches

CableCreation CS0147 SATA cable 2-pack 0.6 ft red right-angle straight locking latch

SKU CH-DXAY-NN3XP

Two 0.6 ft SATA III cables — one right-angle, one straight — with locking latches for 6 Gbps drives

  • TypeSATA
  • ColorBlack & Red
  • Connector DetailSata
  • Terminal GenderFemale-to-Female
  • Speed6 gigabits_per_second
  • ConductorSteel
  • SATA III revision 3.0 delivers up to 6 Gbps throughput
  • Locking latch on each connector prevents accidental disconnection
  • Right-angle plus straight plugs fit tight drive bays
  • Backwards compatible with SATA 1.0 and 2.0 ports
  • Two 0.6 ft cables included for dual-drive installs

Two cables for tight builds

This two-pack supplies one downward right-angle and one straight 7-pin SATA data cable, each 0.6 ft long. They connect a motherboard or host controller to 2.5 in SSDs, 3.5 in HDDs or optical drives. The red and black colour coding helps identify cables inside a crowded case.

Locking latch prevents accidental disconnects

Press the latch before plugging or unplugging to engage the spring-steel locking mechanism. The short length reduces clutter but leaves little slack, so plan the routing before securing drives. Backwards compatibility with SATA 1.0 and 2.0 ports means the cables work with older controllers.

Speed limited by the slowest device

The SATA 3.0 interface supports up to 6 Gbps, yet actual throughput cannot exceed the rating of the attached drive or controller. Builders needing longer runs or external eSATA connections should look elsewhere, as these cables are strictly for internal chassis use.

Highlights

  • SATA III revision 3.0 delivers up to 6 Gbps throughput
  • Locking latch on each connector prevents accidental disconnection
  • Right-angle plus straight plugs fit tight drive bays
  • Backwards compatible with SATA 1.0 and 2.0 ports
  • Two 0.6 ft cables included for dual-drive installs

Specifications

BrandCableCreation
ModelCS0147
TypeSATA
ColorBlack & Red
Connector DetailSata
Terminal GenderFemale-to-Female
Speed6 gigabits_per_second
ConductorSteel
FeaturesHigh Speed

Questions about this item

How can I confirm the 6 Gbps link is active after connecting the CS0147 cables?

Check the motherboard BIOS or OS disk utility for a negotiated 6 Gbps link speed on the attached 2.5" SSD or 3.5" HDD.

What does the 2-pack contain and what extra parts are needed?

The pack includes one 0.6 ft right-angle and one 0.6 ft straight 7-pin SATA data cable; separate SATA power cables are required for each drive.

Which cable orientation should I choose for a tight drive bay?

Use the downward right-angle connector where clearance behind the drive is limited; use the straight connector where the port faces open space.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.