We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short black and red SATA cables, one straight and one right-angled, each 0.2 m long with locking latches

CableCreation CS0147 SATA 3.0 6.0Gbps 0.2m 2-Pack angle straight

SKU CH-S61A-6Q5F3

Two 0.2 m SATA 3.0 cables, one angled and one straight, each with locking latches for secure 6 Gbps drive connections

  • TypeSATA
  • ColorBlack & Red
  • Connector DetailSata
  • Terminal GenderFemale-to-Female
  • Speed6 gigabits_per_second
  • ConductorSteel
  • SATA 3.0 delivers up to 6 Gbps throughput
  • Backwards compatible with SATA 1.0 and 2.0 ports
  • Locking latch on each connector prevents accidental disconnection
  • 2 m length suits tight chassis routing
  • Pack includes one angled and one straight connector

What it is

This two-pack supplies SATA III data cables rated for 6.0 Gbps. One cable has a straight connector and the other a down-angle connector, both 0.2 m long with locking latches. They connect motherboards or host controllers to 2.5 inch SSD, 3.5 inch HDD or optical DVD drives.

Who it suits and who should look elsewhere

Builders fitting drives in tight spaces where an angled plug eases routing will benefit. The pair covers both straight and angled needs in one purchase. Buyers who need longer runs or cables without locking latches should look elsewhere.

Build fit

The 0.2 m length keeps cable clutter low inside small cases. Locking latches prevent accidental disconnection during transport or vibration. Backwards compatibility with SATA 1.0 and 2.0 ports means the cables work with older controllers, though throughput will match the slowest device in the chain.

Highlights

  • SATA 3.0 delivers up to 6 Gbps throughput
  • Backwards compatible with SATA 1.0 and 2.0 ports
  • Locking latch on each connector prevents accidental disconnection
  • 2 m length suits tight chassis routing
  • Pack includes one angled and one straight connector

Specifications

BrandCableCreation
ModelCS0147
TypeSATA
ColorBlack & Red
Connector DetailSata
Terminal GenderFemale-to-Female
Speed6 gigabits_per_second
ConductorSteel
FeaturesHigh Speed

Questions about this item

What type of SATA ports must my motherboard or controller provide for these CS0147 cables to connect?

They require standard 7-pin SATA data ports on the host side, matching the straight and right-angle plugs supplied.

Will the 6.0 Gbps rating work with my older SATA 1.0 and 2.0 drives?

Yes, the cables are backwards compatible with SATA 1.0 and 2.0 ports, though transfer speed will be limited to the slowest device.

How can I verify the locking latches are engaged after I plug the cables in?

Press each latch until it clicks; the connector should then resist a gentle pull without detaching.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.