We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black four-pin Molex to fifteen-pin SATA power adapters with straight connectors

CableCreation

CableCreation 4 Pin Molex to 15 Pin SATA Power Cable Adapter 5-Pack

SKU CH-SJVZ-8NDS3

Connects SATA drives to legacy Molex LP4 power ports with straight 15-pin connectors in a five-pack

  • Connect latest SATA drives to legacy Molex power supplies
  • Four-inch straight connectors simplify internal cable routing
  • Male Molex to female SATA power adapter ensures compatibility
  • Five adapters included for multiple drive installations
  • New condition guarantees reliable power delivery

Power-adapter purpose

This five-pack converts legacy Molex LP4 connectors from a power supply into 15-pin SATA power plugs. It lets builders attach Serial SATA hard drives or optical drives without replacing the PSU. The short 4-inch straight connectors keep internal routing tidy. Each cable is new and ready for immediate installation.

Capacity and headroom

The pack supplies five adapters, so one purchase covers multiple drive bays in a single system. Each unit handles the standard power draw of a SATA hard drive or optical drive. The short length limits reach in full-tower cases or when the PSU sits far from the drive cage. Builders needing longer runs or right-angle plugs will need a different solution.

Connector specification

The critical detail is the male 4-pin Molex to female 15-pin SATA power interface. Only power supplies that still expose Molex LP4 ports can use these adapters. Units with exclusively native SATA or modular SATA cables cannot accept the Molex end. Verify the PSU connector type before ordering.

Highlights

  • Connect latest SATA drives to legacy Molex power supplies
  • Four-inch straight connectors simplify internal cable routing
  • Male Molex to female SATA power adapter ensures compatibility
  • Five adapters included for multiple drive installations
  • New condition guarantees reliable power delivery

Specifications

No published specifications for this item yet.

Questions about this item

Will the 4-inch Molex-to-SATA adapters let me keep my older LP4 power supply and still run new SATA drives?

Each adapter converts one legacy 4-pin Molex LP4 connector into a 15-pin SATA power plug, so existing power supplies without native SATA leads can power modern hard drives or optical drives.

How can I confirm the 15-pin SATA connection is delivering power correctly once installed?

The drive should spin up and appear in the BIOS or operating system without errors; a stable system under load indicates the adapter is passing the required voltages.

What comes in the 5-pack and is anything else needed to complete the installation?

The package contains five 4-inch straight-connector Molex-to-SATA power cables; no extra cables are required if your power supply has free Molex LP4 ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.