We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 13-inch Y-cable with one 8-pin PCIe female and two 8-pin (6+2) male connectors

Cable Matters 8 Pin PCIe Splitter Cord 13-inch 18AWG

SKU CH-K9F6-EKP7Q

Splits one PCIe 8-pin connector into two 8-pin (6+2) plugs for graphics cards, 13-inch 18AWG sleeved cable

  • TypeSpeaker Wires
  • ColorBlack
  • Connector DetailDVI to DVI
  • Terminal GenderFemale to Female
  • SpecificationsBlack
  • FeaturesBlack
  • Adds two PCIe power connectors from one 8-pin cable
  • 13-inch sleeved cable with 18AWG tin-coated copper wire
  • Works with non-modular and semi-modular PSUs only
  • Dual 6+2 male ends fit 6-pin or 8-pin graphics cards
  • Includes hook-and-loop strip for tidy cable management

PCIe 8-pin splitter for dual GPU power

This 13-inch Y-cable converts one 8-pin PCIe female connector from a non-modular or semi-modular PSU into two 8-pin (6+2) male plugs for graphics cards. It suits builders whose power supply lacks enough native PCIe leads for a second GPU or a card with dual connectors. The 18AWG conductors carry the current while the sleeved jacket keeps routing tidy.

Simple plug-in with one compatibility catch

Installation is a direct connection: seat the female end onto the PSU’s existing 8-pin male cable, then attach each 6+2 male end to the graphics card. The sliding 2-pin section lets each plug serve either a 6-pin or 8-pin socket. The only common issue is attempting use with a fully-modular PSU, which this adapter does not support.

Fixed length and current limit define

At 33 cm total length the cable only reaches components near the PSU, so it cannot span large cases or rear-mounted GPU brackets. The 1007-18AWG gauge sets the maximum safe current, meaning the splitter cannot deliver more power than a single 8-pin source provides; high-wattage cards drawing beyond that rating risk overload.

Highlights

  • Adds two PCIe power connectors from one 8-pin cable
  • 13-inch sleeved cable with 18AWG tin-coated copper wire
  • Works with non-modular and semi-modular PSUs only
  • Dual 6+2 male ends fit 6-pin or 8-pin graphics cards
  • Includes hook-and-loop strip for tidy cable management

Specifications

BrandCable Matters
TypeSpeaker Wires
ColorBlack
Connector DetailDVI to DVI
Terminal GenderFemale to Female
SpecificationsBlack
FeaturesBlack
Disclaimernot_applicable

Questions about this item

How do I verify the splitter is delivering power correctly after connecting it to my PSU and graphics card?

The graphics card should power on and be detected by the system BIOS or operating system without any instability or shutdowns under load.

What is included with the Cable Matters splitter and what must I provide separately?

The package includes one 13-inch 18AWG Y-cable with an 8-pin PCIe female connector and two 8-pin (6+2) male connectors, plus a hook-and-loop strip. You must provide a compatible non-modular or semi-modular PSU with an 8-pin PCIe male cable.

Which version of this splitter should I choose for a graphics card requiring two 8-pin connectors?

This single model provides one 8-pin PCIe female input that splits into two 8-pin (6+2) male outputs, supporting cards needing dual 8-pin or 6-pin connections from compatible PSUs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.