We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided 40 cm PWM fan splitter cables with five 4-pin connectors each

Cable Matters 1007 4-pin PWM fan 1-to-5 splitter 2-pack 40cm braided

SKU CH-D5H8-TZXFA MPN 1007

Two 40 cm braided splitters turn one 4-pin PWM header into five fan ports and include ten tie wraps

  • TypeSpeaker Wires
  • ColorBlack
  • Connector DetailDVI to DVI
  • Terminal GenderFemale to Female
  • SpeedTest Value
  • Specifications6 gigabits_per_second, 5 Way * 2
  • Connect up to five fans from one header with 5-way PWM splitter
  • Two 40 cm braided cables included for flexible routing
  • Supports both 4-pin and 3-pin fans across 12 V and 5 V lines
  • Braided nylon sleeving protects wires and keeps the build tidy
  • Adhesive-backed hub mounts securely without tools

PWM Fan Hub for Case Cooling

This 2-pack of 4-pin PWM fan splitters turns a single motherboard header into five fan connections. Each hub measures 40 cm and uses 24 AWG tinned copper conductors rated for 80 °C. The braided nylon sleeve protects the wires and keeps cable routing tidy inside the chassis.

Tool-Free Installation with Adhesive Mount

Each hub includes a sticky backing that secures the splitter to the case interior without screws. Ten black tie wraps are supplied for additional cable management. Builders should verify the motherboard header current limit before connecting five fans to avoid overloading the circuit.

Suited for Multi-Fan Air Cooling Builds

Ideal for enthusiasts adding several case fans to a board with limited headers. Not intended for high-current pump headers or voltage-controlled 3-pin arrays that require independent speed curves per fan. Users needing per-fan RPM reporting should consider a dedicated fan controller.

Highlights

  • Connect up to five fans from one header with 5-way PWM splitter
  • Two 40 cm braided cables included for flexible routing
  • Supports both 4-pin and 3-pin fans across 12 V and 5 V lines
  • Braided nylon sleeving protects wires and keeps the build tidy
  • Adhesive-backed hub mounts securely without tools

Specifications

BrandCable Matters
TypeSpeaker Wires
ColorBlack
Connector DetailDVI to DVI
Terminal GenderFemale to Female
SpeedTest Value
Specifications6 gigabits_per_second, 5 Way * 2
ConductorCopper Conductor
Features5 Way * 2

Questions about this item

How can I verify the 5-way PWM hub is functioning correctly after connecting it to the CPU fan header?

The motherboard BIOS or monitoring software should report a single RPM reading from the header; all five attached fans will spin at the same PWM duty cycle, confirming the splitter is passing the control signal properly.

What comes in the package and what must be purchased separately?

The box contains two 40 cm 1-to-5 PWM splitter cables and ten black tie wraps; no additional cables or adapters are required for standard 4-pin or 3-pin fans.

Which version should I choose — the 2-pack of 1-to-5 hubs or a simpler Y-splitter?

Choose the 2-pack of 1-to-5 hubs when you need to run up to ten fans from two motherboard headers; a Y-splitter only supports two fans per header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.