Cable Leader
Cable Leader OM2 LC to SC Duplex 50/125 3m Orange OFNR Corning
OM2 multimode duplex patch cable with LC to SC connectors, 50/125µm Corning fiber, OFNR orange jacket, 3m length for 1G/10G short-reach links
- ColorOrange
- Length5 - 10 ft.
- Connector Number2
- Gigabit and 10G short-reach links over multimode (1000BASE-SX, 10GBASE-SR)
- Genuine Corning optical fiber for consistent, reliable optical performance
- LC/UPC connectors with precision ceramic ferrules and push-pull latching
- OFNR riser-rated jacket suitable for in-building and data center runs
- Compatible with SFP, SFP+, QSFP transceivers, switches, routers, media converters and patch panels
Cable type and length
The Cable Leader OM2 LC to SC duplex patch cable is a 3 m multimode fiber jumper built on genuine Corning optical fiber. Its orange OFNR jacket is rated for in-building riser installations, and the duplex construction keeps transmit and receive fibers paired for consistent polarity.
Intended use and limits
This cable suits data-center, SAN, enterprise backbone and switch-to-switch links that run 1000BASE-SX or 10GBASE-SR over 50/125 µm multimode fiber. It is not for single-mode infrastructure, longer-reach 10G or 25G variants that require OS2, or installations that demand a plenum-rated OFNP jacket.
Deciding specification
The fiber is OM2 multimode with a 50/125 µm core/cladding diameter and LC/UPC to SC/UPC connectors, so it only works with ports and transceivers designed for that exact multimode interface.
Highlights
- Gigabit and 10G short-reach links over multimode (1000BASE-SX, 10GBASE-SR)
- Genuine Corning optical fiber for consistent, reliable optical performance
- LC/UPC connectors with precision ceramic ferrules and push-pull latching
- OFNR riser-rated jacket suitable for in-building and data center runs
- Compatible with SFP, SFP+, QSFP transceivers, switches, routers, media converters and patch panels
Specifications
| Brand | GENERIC |
|---|---|
| Color | Orange |
| Length | 5 - 10 ft. |
| Connector Number | 2 |
Questions about this item
Does the orange OFNR jacket meet in-building fire-code requirements for riser runs?
Yes, the OFNR rating means the cable is approved for vertical riser and general indoor installations without conduit.
What transceivers and patch-panel ports do I need on hand to plug this cable in?
You need LC and SC receptacles — SFP, SFP+ or QSFP modules on the LC side and SC ports on the patch panel or switch side.
Will the duplex LC-to-SC polarity match my existing OM2 patch-panel cassettes?
The duplex zip-cord keeps transmit and receive fibers paired in the standard A-to-B orientation used by OM2 cassettes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



