We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fiber patch cable with ST connectors on both ends, 1 metre long

Cable Leader

Cable Leader OM1 ST to ST Fibre Optic Cable 1m 62.5/125 Duplex Orange OFNR Corning

SKU CH-TR8Y-5NZ6Z

A 1 m multimode duplex patch cable with ST/UPC connectors, Corning 62.5/125 µm fibre and an OFNR-rated orange jacket for Gigabit and 10G short-reach links

  • ColorOrange
  • Length36" - 40"
  • Connector Number2
  • OM1 multimode supports 1G and 10G short-reach links
  • Genuine Corning fiber delivers consistent, reliable optical performance
  • Precision ceramic ferrules with push-pull latching ensure secure, low-loss mating
  • OFNR riser-rated jacket suits in-building and data center runs
  • ST to ST duplex design keeps transmit and receive fibers paired

OM1 ST to ST Duplex Patch Cable

The Cable Leader OM1 ST to ST fibre optic patch cable is a 1m multimode duplex jumper built on genuine Corning optical fibre. It carries 62.5/125µm cores inside an orange OFNR riser-rated jacket. The assembly is intended for Gigabit and 10G short-reach links such as 1000BASE-SX and 10GBASE-SR in data centres, SANs and enterprise backbones.

Push-pull ST connectors install in seconds

Each end uses an ST/UPC connector with a precision ceramic ferrule and push-pull latching. Align the key, push until the latch clicks, and the link is seated. The duplex zip-cord keeps transmit and receive fibres paired so polarity stays correct. The only common mistake is forcing a connector without checking the key orientation, which can damage the ferrule end-face.

Verify OM1 multimode and ST ports before ordering

Confirm that both sides of your link use ST interfaces and accept OM1 62.5/125µm multimode fibre. Check that transceivers, switches, routers or patch panels are rated for the same core size and wavelength. Ensure the OFNR jacket rating satisfies your building code for in-building riser runs.

Highlights

  • OM1 multimode supports 1G and 10G short-reach links
  • Genuine Corning fiber delivers consistent, reliable optical performance
  • Precision ceramic ferrules with push-pull latching ensure secure, low-loss mating
  • OFNR riser-rated jacket suits in-building and data center runs
  • ST to ST duplex design keeps transmit and receive fibers paired

Specifications

BrandGENERIC
ColorOrange
Length36" - 40"
Connector Number2

Questions about this item

How can I verify the 1m OM1 ST-to-ST patch cable is passing traffic after installation?

Connect the ST/UPC connectors to matching transceivers or patch panels, then check link lights on both ends and run a 1000BASE-SX or 10GBASE-SR test to confirm error-free throughput.

What comes in the box and what must I supply separately for the Cable Leader OM1 duplex jumper?

The package contains the 1m orange OFNR duplex cable with ST/UPC ceramic ferrules on both ends; you must provide compatible SFP, SFP+ or QSFP transceivers and any patch-panel adapters.

Which version of the Cable Leader OM1 ST-to-ST cable should I choose for a 10G short-reach link?

The 1m OM1 duplex cable with 62.5/125µm Corning fiber and OFNR jacket is rated for 10GBASE-SR distances, so select this exact length and jacket rating for in-building riser runs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.