We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fiber patch cable with two ST connectors, three metres long

Cable Leader

Cable Leader OM1 ST to ST Duplex 62.5/125 3m (10ft) OFNR Orange

SKU CH-9HT8-YENAR

Multimode OM1 duplex jumper with ST/UPC connectors and Corning fiber for 1000BASE-SX and 10GBASE-SR links

  • ColorOrange
  • Length5 - 10 ft.
  • Connector Number2
  • Genuine Corning fiber ensures consistent optical performance
  • OM1 multimode supports 1G and 10G short-reach links
  • ST/UPC ceramic ferrules provide secure, low-loss connections
  • OFNR riser-rated jacket suits in-building and data center runs
  • Duplex 62.5/125µm design pairs transmit and receive fibers

OM1 Duplex 62.5/125 ST Patch Cable

This 3-metre multimode fiber patch cable uses genuine Corning glass and precision ST/UPC ceramic ferrules with push-pull latching. The orange OFNR riser-rated jacket makes it suitable for in-building and data-centre runs. It is a ready-made duplex jumper for high-speed network links.

For short-reach multimode links.

Network engineers and data-centre technicians who need a 3-metre OM1 duplex jumper for 1000BASE-SX or 10GBASE-SR segments will find the correct connectors and fiber grade here. Buyers who require single-mode fiber, longer distances, LC or MPO connectors, or higher-bandwidth OM3/OM4/OM5 grades should select a different cable type.

ST/UPC connectors on OM1 62.5/125 µm fiber

The cable terminates in ST/UPC connectors on both ends, built on 62.5/125 µm Corning multimode fiber with an OFNR jacket. This connector-and-fiber combination determines compatibility with SFP, SFP+ and QSFP transceivers, switches, routers, media converters and patch panels in enterprise and SAN environments.

Highlights

  • Genuine Corning fiber ensures consistent optical performance
  • OM1 multimode supports 1G and 10G short-reach links
  • ST/UPC ceramic ferrules provide secure, low-loss connections
  • OFNR riser-rated jacket suits in-building and data center runs
  • Duplex 62.5/125µm design pairs transmit and receive fibers

Specifications

BrandGENERIC
ColorOrange
Length5 - 10 ft.
Connector Number2

Questions about this item

Should I pick this 3m OM1 ST duplex or a different length?

Choose the 3m length when patch panels, switches or transceivers sit within a single rack or adjacent racks; longer lengths add slack and attenuation without benefit for short runs.

What does the 62.5/125µm core mean for my 1G or 10G link?

The 62.5µm core matches OM1 multimode specs, so the cable works with 1000BASE-SX and 10GBASE-SR transceivers for short-reach connections inside data centers or enterprise backbones.

How does the ST/UPC connector and OFNR jacket limit where I can install it?

ST/UPC ceramic ferrules with push-pull latching give secure, low-loss mating on patch panels and transceivers, while the OFNR riser rating allows in-building vertical runs but not plenum spaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.