We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fibre patch cable with SC and ST connectors, 10m length

Cable Leader

Cable Leader OM1 SC to ST Duplex Fibre Optic Cable 10m Orange

SKU CH-ACP9-9V574

Multimode OM1 duplex patch cable with SC to ST connectors, 10m length, Corning fiber and OFNR jacket for 1G and 10G short-reach links

  • ColorOrange
  • Length31 - 50 ft.
  • Connector Number2
  • OM1 multimode supports Gigabit and 10G short-reach links
  • Genuine Corning fiber delivers consistent, reliable optical performance
  • SC/UPC and ST/UPC ceramic ferrules with push-pull latching ensure secure, low-loss mating
  • OFNR riser-rated jacket suits in-building and data center installations
  • 10m duplex length links switches, servers, transceivers and patch panels

10 m OM1 duplex patch cable

This 10 metre multimode fibre patch cable uses OM1 62.5/125 µm Corning glass with SC/UPC and ST/UPC connectors. The OFNR-rated orange jacket is approved for in-building riser runs. It is intended for network engineers and installers building or extending short-reach links in data centres, SANs and enterprise backbones.

Corning fibre and ceramic ferrules

Genuine Corning optical fibre provides consistent attenuation and bandwidth across the full length. Precision ceramic ferrules with push-pull latching deliver repeatable low-loss mating and prevent accidental disconnects during moves or maintenance. The duplex construction keeps transmit and receive strands paired and correctly oriented for immediate polarity compliance.

1G and 10G short-reach headroom

The cable supports 1000BASE-SX and 10GBASE-SR transceiver links over multimode fibre, covering typical rack-to-rack and row-to-row distances. It will not serve long-haul single-mode applications or reach the extended distances required by 40G/100G SR4 optics. Installers needing single-mode performance or higher-speed parallel optics must select a different cable type.

Highlights

  • OM1 multimode supports Gigabit and 10G short-reach links
  • Genuine Corning fiber delivers consistent, reliable optical performance
  • SC/UPC and ST/UPC ceramic ferrules with push-pull latching ensure secure, low-loss mating
  • OFNR riser-rated jacket suits in-building and data center installations
  • 10m duplex length links switches, servers, transceivers and patch panels

Specifications

BrandGENERIC
ColorOrange
Length31 - 50 ft.
Connector Number2

Questions about this item

How often do the SC/UPC and ST/UPC ceramic ferrules need cleaning or replacement in a data-center patch panel?

The precision ceramic ferrules are designed for repeatable low-loss mating; inspect and clean with a fibre scope and lint-free wipes whenever you re-seat the connectors or see rising insertion loss — no scheduled replacement interval is defined for the ferrules themselves.

What distance limit applies first when running 10GBASE-SR over this OM1 62.5/125 µm duplex jumper?

OM1 multimode supports 10GBASE-SR only up to 33 metres, so the 10-metre length of this cable stays well within the reach limit; the modal bandwidth of the 62.5 µm core is the limiting factor, not the cable length.

Does the orange OFNR riser jacket add noticeable heat or power draw when the cable runs continuously in a cabinet?

The passive fibre assembly draws no power and generates no heat; the OFNR jacket is a flame-retardant riser rating for in-building safety and does not affect thermal or electrical characteristics.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.