We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fiber patch cable with ST connectors, 10ft length

Cable Leader

Cable Leader FB104-5403 OM2 ST-ST Duplex 50/125 10ft Orange

SKU CH-K470-WSYPH

Multimode OM2 duplex fiber patch cable with ST/UPC connectors, 50/125 µm core, OFNR jacket, 10 ft length, genuine Corning fiber for 1G/10G links

  • ColorOrange
  • Length5 - 10 ft.
  • Connector Number2
  • Supports 1G and 10G short-reach links over multimode fiber
  • Genuine Corning fiber ensures consistent, reliable optical performance
  • ST/UPC ceramic ferrules with push-pull latching give secure low-loss mating
  • OFNR riser-rated jacket suited for in-building and data center runs
  • Duplex 50/125µm construction keeps transmit and receive fibers paired

OM2 ST-ST Duplex Patch Cable

The Cable Leader FB104-5403 is a 10 ft multimode fiber optic patch cable with ST/UPC connectors on both ends. It uses genuine Corning 50/125 µm fiber in an orange OFNR riser-rated jacket. The duplex construction keeps transmit and receive strands paired for switch-to-switch and server-to-switch links.

Who this suits and who it does not

Network engineers needing short-reach 1G or 10G multimode links over ST interfaces will find this cable a direct fit. Buyers whose equipment uses LC, SC, or MPO connectors cannot use this jumper without adapters. Installations requiring single-mode fiber or plenum-rated jackets must select a different cable type.

OM2 50/125 µm fiber specification

The core and cladding dimensions of 50/125 µm define the OM2 multimode classification and determine compatibility with 1000BASE-SX and 10GBASE-SR transceivers. This specification decides whether the cable matches the required link budget and transceiver interface for the target network segment.

Highlights

  • Supports 1G and 10G short-reach links over multimode fiber
  • Genuine Corning fiber ensures consistent, reliable optical performance
  • ST/UPC ceramic ferrules with push-pull latching give secure low-loss mating
  • OFNR riser-rated jacket suited for in-building and data center runs
  • Duplex 50/125µm construction keeps transmit and receive fibers paired

Specifications

BrandGENERIC
ColorOrange
Length5 - 10 ft.
Connector Number2

Questions about this item

How do I verify the Cable Leader FB104-5403 is working after connecting it?

Check the link lights on both SFP or SFP+ transceivers; a steady green or amber LED on each end confirms the 1000BASE-SX or 10GBASE-SR link is up and the ST/UPC ceramic ferrules are seated correctly.

What comes in the box with the FB104-5403 and what must I buy separately?

The box contains the 3 m OM2 duplex patch cable with ST/UPC connectors on both ends; you must supply compatible SFP, SFP+ or QSFP transceivers and any patch-panel adapters required by your rack.

Which OM2 ST-ST duplex length should I choose for my run?

The FB104-5403 is a 10 ft (3 m) jumper; select it when the distance between transceivers or patch panels is at or under that length — longer runs need a different cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.