We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fibre patch cable with SC and ST connectors, 2m length

Cable Leader

Cable Leader FB103-5502 OM1 SC to ST Fibre Optic Cable 2m Orange

SKU CH-VKJ7-HMD2E

A 2 m OM1 multimode duplex jumper with SC to ST connectors, Corning fiber and OFNR jacket for 1 GbE and 10 GbE short-reach links

  • ColorOrange
  • Length5 - 10 ft.
  • Connector Number2
  • Corning fiber ensures consistent, low-loss performance
  • OM1 duplex supports 1G and 10G short-reach links
  • SC/UPC and ST/UPC ceramic ferrules give secure, repeatable mating
  • OFNR riser-rated jacket approved for in-building and data-center runs
  • 2m orange duplex jumper connects switches, transceivers and patch panels

2 m OM1 SC to ST patch cable

This two-metre multimode duplex jumper uses genuine Corning 62.5/125 µm fiber and SC/UPC to ST/UPC connectors with ceramic ferrules. The orange OFNR riser-rated jacket suits in-building and data-centre runs. It carries 1000BASE-SX and 10GBASE-SR signals over short-reach multimode links.

Suits multimode links with SC/ST gear

Network engineers extending 1 GbE or 10 GbE multimode connections between switches, servers, SFP/SFP+/QSFP transceivers or patch panels will find the cable matches their connector mix and distance budget. Installations that require single-mode reach, higher-grade OM3/OM4 bandwidth, LC or MPO connectors, or plenum-rated jackets need a different cable.

Verify connector types and fiber grade

Confirm both ends of your link accept SC and ST connectors with UPC polish. Ensure the active equipment supports OM1 62.5/125 µm multimode at the intended speed and distance. Check that an OFNR jacket meets local fire-code requirements for the planned pathway.

Highlights

  • Corning fiber ensures consistent, low-loss performance
  • OM1 duplex supports 1G and 10G short-reach links
  • SC/UPC and ST/UPC ceramic ferrules give secure, repeatable mating
  • OFNR riser-rated jacket approved for in-building and data-center runs
  • 2m orange duplex jumper connects switches, transceivers and patch panels

Specifications

BrandGENERIC
ColorOrange
Length5 - 10 ft.
Connector Number2

Questions about this item

What equipment must I already have to use this FB103-5502 cable?

You need devices with SC and ST multimode ports, such as switches, routers, media converters or patch panels that accept SFP, SFP+ or QSFP transceivers for 1000BASE-SX or 10GBASE-SR links.

Will this OM1 62.5/125µm cable work with older 62.5/125µm multimode gear I keep?

Yes, the core and cladding match legacy OM1 multimode equipment, so it connects directly to older switches, servers or patch panels that use the same 62.5/125µm specification.

How can I verify the cable is performing correctly after installation?

Check link lights on both transceivers, confirm the negotiated speed shows 1G or 10G, and run a continuity or optical loss test to ensure low-loss mating of the ceramic ferrules.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.