We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fiber patch cable with LC connectors at both ends, 2m length

Cable Leader

Cable Leader FB103-5102 OM1 LC to LC Duplex 62.5/125 2m Orange

SKU CH-68TJ-FKM0K

OM1 multimode duplex patch cable with LC/UPC connectors and Corning fiber for 1G and 10G short-reach links

  • ColorOrange
  • Length5 - 10 ft.
  • Connector Number2
  • OM1 multimode supports 1G and 10G short-reach links
  • Genuine Corning fiber ensures consistent, reliable optical performance
  • LC/UPC ceramic ferrules with push-pull latching give secure, low-loss mating
  • OFNR riser-rated jacket suits in-building and data center runs
  • Duplex 62.5/125µm construction keeps transmit and receive fibers paired

OM1 LC duplex patch cable

The Cable Leader FB103-5102 is a 2-metre multimode fiber jumper with LC/UPC connectors on each end. It uses genuine Corning 62.5/125 µm fiber to carry 1G and 10G short-reach signals between transceivers, switches and patch panels. The orange OFNR jacket meets riser-rated requirements for in-building runs. This cable suits data-center, SAN and enterprise backbone links where OM1 multimode is specified.

OFNR riser jacket and ceramic ferrules

The duplex construction keeps transmit and receive fibers paired and correctly oriented for quick installation. Precision ceramic ferrules with push-pull latching provide secure, repeatable mating and low insertion loss. The OFNR riser-rated jacket allows routing through vertical shafts and between floors without additional conduit. LC connectors are compatible with SFP, SFP+ and QSFP transceiver modules as well as standard patch panels.

Passive fiber — no power or noise

As a passive optical cable it draws no power, generates no heat and produces no audible noise. Signal attenuation stays within OM1 limits for 1000BASE-SX and 10GBASE-SR distances. The Corning fiber core maintains consistent optical performance across repeated connect and disconnect cycles. No active components means no thermal management or power budget concerns in the link.

Highlights

  • OM1 multimode supports 1G and 10G short-reach links
  • Genuine Corning fiber ensures consistent, reliable optical performance
  • LC/UPC ceramic ferrules with push-pull latching give secure, low-loss mating
  • OFNR riser-rated jacket suits in-building and data center runs
  • Duplex 62.5/125µm construction keeps transmit and receive fibers paired

Specifications

BrandGENERIC
ColorOrange
Length5 - 10 ft.
Connector Number2

Questions about this item

What bandwidth does the OM1 62.5/125 µm multimode fiber provide for 10GBASE-SR links?

The OM1 multimode fiber supports 10GBASE-SR short-reach links; the exact distance limit depends on the transceiver and link budget.

What physical space and connector type are required to install this duplex LC patch cord?

The cable uses duplex LC/UPC connectors with push-pull latching and a 2 mm orange OFNR jacket, so each port needs a standard LC duplex cutout and enough clearance for the boot.

How is the cable terminated, and which step do installers most often miss?

Each end is factory-terminated with precision ceramic ferrules; the step often missed is removing the dust caps and cleaning the ferrule end-faces before mating to avoid contamination loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.