We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6 patch cable, 2 ft, non-booted RJ45 plugs, UTP

Cable Leader

Cable Leader Cat6 Non-Booted Ethernet Cable 2ft Gray 24AWG 550MHz

SKU CH-ZMG0-DK6FP

A 2 ft Cat6 patch cable with non-booted RJ45 plugs for dense patch panels, tested to 550 MHz and built from 24 AWG bare copper with gold-plated contacts

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length2 ft.
  • ColorGray

Length 2ft

Show 2 more configurations

Color Gray

  • Supports Gigabit Ethernet with 550MHz tested bandwidth
  • Non-booted plug fits dense patch panels and keystone jacks
  • 24AWG bare copper with 50-micron gold-plated contacts
  • Backward compatible with Cat5e for drop-in upgrades
  • RoHS compliant with UL cUL ETL safety listings

2ft Cat6 Non-Booted Patch Cable

This 2-foot Category 6 patch cable uses 24AWG bare copper conductors and 50-micron gold-plated RJ45 contacts. It is tested to 550MHz and supports Gigabit Ethernet with 10G capability over short runs. The non-booted plug design targets installers working in high-density patch panels and keystone jacks.

Installing in dense panels and avoiding snags

The non-booted connector seats cleanly in tightly packed patch panels and keystone jacks where a molded boot would block adjacent ports. No special tools are required beyond a standard crimp or punch-down workflow for the panel side. The only common issue is the lack of strain relief on the plug itself, so pull tension should be managed with cable ties or managers.

Capacity for 1G and short-run 10G

Rated to 550MHz, the cable comfortably handles 1Gbps links up to the standard 100-meter channel and can carry 10Gbps over shorter distances typical of rack-to-rack or switch-to-server runs. It does not replace a Cat6a or Cat7 run when full 100-meter 10G performance is required, nor does it add shielding for noisy industrial environments.

Highlights

  • Supports Gigabit Ethernet with 550MHz tested bandwidth
  • Non-booted plug fits dense patch panels and keystone jacks
  • 24AWG bare copper with 50-micron gold-plated contacts
  • Backward compatible with Cat5e for drop-in upgrades
  • RoHS compliant with UL cUL ETL safety listings

Specifications

TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length2 ft.
ColorGray
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I verify the 550 MHz Cat6 cable is performing to spec after I plug it in?

Connect the cable between two Gigabit ports and confirm the link negotiates at 1 Gbps full duplex; the 550 MHz rating means it exceeds the 250 MHz Cat6 minimum for that speed.

What comes with the 2 ft gray Cat6 patch cable and is anything else required?

The box contains the single 2 ft Cat6 UTP cable with RJ45 plugs on both ends; no additional parts are needed for a standard Ethernet connection.

Which C6102 family length or color should I pick for a high-density patch panel?

Choose the 2 ft gray non-booted version when panel space is tight; the shorter length and absent boot improve airflow and cable management in dense racks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.