We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 10ft Cat6 Ethernet cable with non-booted RJ45 connectors on both ends

Cable Leader

Cable Leader Cat6 Non-Booted Ethernet Cable 10ft White 24AWG

SKU CH-PQ37-Q118V

Cat6 patch cable tested to 550 MHz with non-booted RJ45 plugs for dense patch-panel installs

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorWhite

Length 10ft

Show 2 more configurations

Color White

  • Supports Gigabit and short-run 10G at tested 550MHz
  • Non-booted plug fits dense patch panels and improves airflow
  • 24AWG bare copper with 50-micron gold contacts resists corrosion
  • Backward compatible with Cat5e for drop-in structured cabling
  • Works with routers, switches, patch panels, PCs and PoE devices

Target Installations

This ten-foot Cat6 patch cable is built for high-density networking where space is tight. The non-booted RJ45 plugs seat cleanly in crowded patch panels and keystone jacks, making it a practical choice for data centers, server rooms and structured cabling runs that demand tidy cable management.

Before You Order

Verify that your patch panel or keystone ports accept non-booted 8P8C connectors without a latch cover. Ensure the 10 ft length suits the run between your switch, router, patch panel or PoE device without excess slack. The cable is unshielded UTP, so confirm that your environment does not require shielded or outdoor-rated cabling.

Sustained Load Behaviour

Rated to 550 MHz, the cable exceeds the 250 MHz Cat6 baseline and maintains Gigabit Ethernet throughput over its full length. Bare copper 24 AWG conductors and 50-micron gold-plated contacts preserve signal integrity during continuous traffic, while the non-booted design promotes airflow around dense connections to help stability over long periods.

Highlights

  • Supports Gigabit and short-run 10G at tested 550MHz
  • Non-booted plug fits dense patch panels and improves airflow
  • 24AWG bare copper with 50-micron gold contacts resists corrosion
  • Backward compatible with Cat5e for drop-in structured cabling
  • Works with routers, switches, patch panels, PCs and PoE devices

Specifications

TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorWhite
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cable ship with any connectors, clips or installation tools, or must those be purchased separately?

The 10 ft Cat6 cable arrives with RJ45 plugs already terminated on both ends; no extra connectors, clips or tools are included in the package.

When should I choose the 10 ft length versus a different length in the C6102 family?

Select the 10 ft version when the device-to-panel or device-to-device distance is roughly three metres; longer or shorter runs should use the matching length from the same C6102 series to avoid excess slack or tension.

What does the 550 MHz test rating mean for actual throughput in a Gigabit network?

The cable is tested to 550 MHz, well above the Cat6 minimum of 250 MHz, so it reliably carries 1 Gbps Ethernet and can support 10 Gbps over short runs in a real installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.