We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 50ft Cat5e non-booted Ethernet cable with RJ45 connectors

Cable Leader

Cable Leader Cat5e Non-Booted Ethernet Cable 50ft Gray 24AWG 350MHz

SKU CH-E20Y-SFQ0D

A 50 ft Cat5e patch cable with non-booted RJ45 plugs for high-density installs, tested to 350 MHz and built with 24 AWG bare copper

  • TypeNetwork Ethernet Cables
  • Cat5E
  • Connector ARJ45
  • Connector BRJ45
  • Length50 ft.
  • ColorGray
  • Supports Gigabit Ethernet with 350MHz tested bandwidth
  • Non-booted plugs fit dense patch panels and keystones
  • 24AWG bare copper conductors with gold-plated contacts
  • 50ft gray UTP cable for structured cabling runs
  • RoHS compliant with UL and ETL verification

50ft Cat5e Non-Booted Patch Cable

This 50-foot Cat5e cable provides a Gigabit Ethernet link for structured cabling in data centers, server rooms and offices. The non-booted RJ45 plugs fit tightly packed patch panels and keystone jacks without snagging. Four twisted pairs of 24AWG bare copper with 50-micron gold-plated contacts maintain signal integrity. It is a cost-effective choice for high-density installs using routers, switches, PCs and PoE devices.

Practical Limits of the Cat5e Standard

The cable is tested to 350MHz and supports 1000BASE-T Gigabit Ethernet over the full 50-foot run. Cat5e is rated for 1 Gbps at up to 100 meters, so this length stays well within the distance limit. Shielding is not included, so the cable relies on twisted-pair balance for noise rejection. For 10 Gbps or 250MHz-plus bandwidth needs, a higher category cable is required.

Check Your Setup Before Ordering

Verify that your patch panels, keystone jacks and switch ports accept standard 8P8C RJ45 plugs without a molded boot. Ensure the 50-foot length reaches between your rack, panel or device locations with enough slack for management. Confirm that Gigabit speed meets the network design, as this cable does not support 10GBASE-T. The gray jacket is one of several colors available for identification.

Highlights

  • Supports Gigabit Ethernet with 350MHz tested bandwidth
  • Non-booted plugs fit dense patch panels and keystones
  • 24AWG bare copper conductors with gold-plated contacts
  • 50ft gray UTP cable for structured cabling runs
  • RoHS compliant with UL and ETL verification

Specifications

TypeNetwork Ethernet Cables
Cat5E
Connector ARJ45
Connector BRJ45
Length50 ft.
ColorGray
ShieldedNo
Wire Gauge24 AWG

Questions about this item

Should I pick the 50 ft gray cable or a different length and color from the C5102 family?

Choose the 50 ft gray version when that exact run length and color code match your patch-panel layout; other C5102 lengths and colors share the same Cat5e 350 MHz specification.

What does the 350 MHz rating mean when the cable is installed in a rack?

The cable is tested to 350 MHz, well above the Cat5e baseline of 100 MHz, giving extra headroom for Gigabit Ethernet (1000BASE-T) signal integrity in dense installs.

Is the RJ45 connector standard 8P8C and what speed does it cap at?

Yes, each end uses an 8P8C RJ45 plug with 50-micron gold contacts; the Cat5e standard caps the link at 1 Gbps (1000BASE-T) over 100 m.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.