We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat5e Ethernet cable, 10 ft, non-booted RJ45 plugs, 24 AWG bare copper

Cable Leader

Cable Leader Cat5e Non-Booted Ethernet Cable 10ft White 24AWG

SKU CH-X0V6-T5X3S

A 10 ft Cat5e patch cable with non-booted RJ45 plugs for dense patch panels, 24 AWG bare copper, tested to 350 MHz

  • TypeNetwork Ethernet Cables
  • Cat5E
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorWhite
  • Supports Gigabit Ethernet with 350MHz tested bandwidth
  • Non-booted plug fits dense patch panels and improves airflow
  • 24AWG bare copper conductors with 50-micron gold-plated contacts
  • 10ft white Cat5e UTP cable for structured cabling runs
  • RoHS compliant with UL and ETL verification for safety

10ft Cat5e Non-Booted Patch Cable

This 10ft Cat5e non-booted Ethernet cable provides a reliable Gigabit wired connection for structured cabling. The white 24AWG bare copper construction uses four twisted pairs terminated with 50-micron gold-plated RJ45 contacts. Tested to 350MHz, it supports 1000BASE-T performance in data centres, server rooms and offices. The non-booted plug design suits high-density patch panels and keystone jacks.

Check connector spacing and cable category

Verify that your patch panel or keystone jack accepts non-booted RJ45 plugs without clearance issues. Confirm the existing infrastructure uses Cat5e or higher cabling so the 350MHz rating is not bottlenecked. Ensure the 10ft length reaches between devices without excess slack in the rack. The cable is unshielded UTP, so assess electromagnetic interference in the install environment.

Ideal for dense gigabit installs

Installers running high-density patch panels, data-centre racks or office keystone jacks benefit from the slim non-booted profile and verified 350MHz bandwidth. PoE devices, routers, switches and PCs all connect reliably with the gold-plated contacts. Buyers needing shielded cable, 10GBASE-T bandwidth or longer runs beyond the Cat5e distance limit should consider higher-category alternatives.

Highlights

  • Supports Gigabit Ethernet with 350MHz tested bandwidth
  • Non-booted plug fits dense patch panels and improves airflow
  • 24AWG bare copper conductors with 50-micron gold-plated contacts
  • 10ft white Cat5e UTP cable for structured cabling runs
  • RoHS compliant with UL and ETL verification for safety

Specifications

TypeNetwork Ethernet Cables
Cat5E
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorWhite
ShieldedNo
Wire Gauge24 AWG

Questions about this item

Does the 10ft white Cat5e cable ship with any extra hardware or do I need to buy clips separately?

Only the cable itself is included — two RJ45 plugs on a 10ft run of 24AWG bare copper — so any cable-management clips, ties or patch-panel screws must be purchased separately.

When should I choose the 10ft length versus a shorter or longer run from the C5102 family?

Pick the 10ft length when the patch-panel port and the switch or keystone jack are within about three metres; shorter cables reduce slack in dense racks, while longer ones reach across aisles or between cabinets.

What does the 350MHz test rating mean for actual Gigabit throughput on my switch?

The cable is verified to 350MHz, well above the Cat5e 100MHz baseline, so it cleanly carries 1000BASE-T at the full 100-metre distance with margin for crosstalk and PoE loads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.