We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 ft power cord with NEMA 5-15P plug and C19 connector, SJT jacketed

Cable Leader

Cable Leader 8ft NEMA 5-15P to C19 14 AWG 15A 125V Black Computer Power Cord

SKU CH-9S4H-JT2JR

An 8 ft heavy-duty 14 AWG cord with a NEMA 5-15P plug and C19 connector rated 15A at 125V, UL Listed and CSA certified

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 8ft

  • Ready for high-draw servers with 14 AWG 15A rating
  • Connects standard outlets to C19 inlets on your gear
  • Heavy-duty SJT jacket rated 105C and 300V
  • Safety certified UL Listed and CSA file E210037
  • Fully grounded 3-wire design with molded strain relief

Power cord for servers and PDUs

This 8-foot cord links a standard NEMA 5-15P wall outlet or power strip to equipment that uses an IEC 60320 C19 inlet. The heavy-duty 14 AWG construction supports 15 A at 125 V, making it suitable for servers, PDUs and higher-draw devices that exceed the capacity of lighter cords.

14 AWG gauge and 15 A rating

The single specification that decides fit is the 14 AWG, 15 A / 125 V rating. Lighter 16 AWG cords are limited to 13 A for typical computers, while 12 AWG steps up to 20 A for dedicated 20 A circuits. This cord sits in the middle for equipment that draws up to 15 A.

Handles servers and PDUs up to 15 A

It comfortably powers servers, monitors, printers and PDUs that operate within the 15 A limit on a 125 V supply. The SJT jacket rated to 105 °C and 300 V adds thermal headroom. It runs out when the load exceeds 15 A or when a 20 A dedicated circuit requires a 12 AWG cord.

Highlights

  • Ready for high-draw servers with 14 AWG 15A rating
  • Connects standard outlets to C19 inlets on your gear
  • Heavy-duty SJT jacket rated 105C and 300V
  • Safety certified UL Listed and CSA file E210037
  • Fully grounded 3-wire design with molded strain relief

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 15 A rating actually let my server draw full power from a standard 125 V outlet?

Yes — the cord is built with 14 AWG copper and a 15 A / 125 V rating, so it can carry the full 15 A a NEMA 5-15P outlet provides without overheating.

Does the SJT jacket and 300 V rating limit what I can plug into a 125 V circuit?

No — the 300 V insulation and 105 °C temperature rating are well above 125 V mains, so the cord is fully compatible with standard North American outlets and power strips.

Will the C19 connector fit the IEC inlet on my rack-mount PDU?

Yes — the C19 end follows the IEC 60320 standard and mates with any C20 inlet found on servers, PDUs, printers and similar equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.